Frage von Paul*Berlin:
I must go to a quick question for 'Steadycams "position, for in my case Schwebi, it is probably for all amateur stabilization systems:
As a Steadycam so has the function to compensate for sudden movements, one can not synonymous with its tilt, right?
One would have only the possibilities
- With the second hand to tilt the entire system, but the stabilizing effect would be gone
- A tripod head to mount on the system to correctly adjust the Camera
- To keep the system up or down to get the subject into the picture,
or?
Antwort von domain:
There are real experts in the field who use such a mixture of self stabilization of the system in combination with manual intervention near s.Gelenk. Right there is a heavy steady relatively insensitive and can conduct themselves fairly.
With our easy Steadier, which should respond yes even without manual intervention of a second hand on a swing with an intended rotation but that is almost impossible.
All Steadycams have something imperfect s.sich. Just as if a waiter should carry a tumbler without wobbling on his tray on the way to the customer.
Antwort von srone:
- With the second hand to tilt the entire system, but the stabilizing effect would be gone
if you tilt the camera to a temporary go would be the prudent insert one or two fingers of the hand placed second, falling where you should, however, are sure to permanently or untersicht to be you had to weigh the overall system together with the tilt head.
lg
SRone
Antwort von pilskopf:
So you can adjust the Steadicam inclined, at least the Glidecam, which is leveling off and then a slant. Light wants it is to make the with the left jab, you can Steadicam yes tilt in any direction as you and basically kept as synonymous, with a long Droptime no problem, this may be even longer than usual by a Merlin the principle is not so easy I think. Of course, one could synonymous a fluid head or a ball joint use for it. I would rather tend to ball joint because of the weight of a fluid head. On the other hand, the child with the Glidecam Schrägfilmen is almost easier than the Glidecam keep right in horizon. Running is rather complicated so that when you walk down stairs, for example, and turns it back up.
Only with a false Droptime, so if the bottom of the Steadicam is too heavy, a willing Rotate is difficult because the Steadicam to strong downward pressure and counter pressures by ugly errors occur, so a correct Droptime 2.5 seconds for a small Glidecam is already may resort to the good enough. I see no problem in there. I speak here, but only of a Glidecam in the lower weight classes.
Antwort von Macaroni:
Hi,
what you might think is a tiltPlate. Is used for long trips including stairs:
http://www.betz-tools.com/acc_tiltplate_d.php
Greeting
Macaroni
Antwort von Paul*Berlin:
I once renamed the thread to another question for ne not even have to open a thread.
Thanks for the synonymous Answers relating to my first question! Second question:
Can the Steadycam, which I will get me the Schwebi, a cable from the camcorder to be laid off? I thought that if you s.Griff the cable sticking with sufficient flexibility, the stabilization is not affected. Maybe you can help me, yes?
Antwort von domain:
The more flexible the cable and the larger the loop to the handle, the less is the stabilization may be impaired. A constant balancing Of case to case but is likely to be increasingly necessary.
If you think s.eine microphone connection to a field recorder, but then a stable attachment of the recorder see below would be part of Schwebis as a partial substitute the weight much better solution.
Antwort von Paul*Berlin:
Thank domain!
No, microphone connection is not needed. It is about the video signal, which s.den director and his control monitor should be given. Sound is controlled separately and recorded.
Antwort von srone:
In this case, I would be a short, approximately 1-1.5 m long, using highly flexible video cable, intercepted near the turning point of the steady, then hose s.deinem bund (belt) of fixed and there with the normal green weiterverlängern to monitor.
lg
SRone
Antwort von Paul*Berlin:
Hey, thought I was synonymous with belt buckle, cool! : D
But a plain, black, 3-wire A / V cable is flexible enough? Else could I cut the two sound cable ... If that is there'll, I "try it once, then I'll first have to get used to it eh;)
Antwort von srone:
wenns you do not mind cutting off the audio, in any case makes the cable more flexible, be flexible 3 times to be exact. do you know the velcro strips to bundle cable wrapped around? something like s.gürtel fix and you are quickly online or offline.
lg
SRone
