Infoseite // RGB signals for Ambilight



Frage von sinistersnipe:


Hello

I think about my DIY Ambilight to build. I will accomplish by I have a microprocessor so that the programming rgb data of a video source ausließt, per-forming the average color will take place, and then with help of 3 Luxeon LEDs is reproduced.

You need to have but I know exactly how an RGB signal is transmitted (do not know whether this is relevant, but I plan it out of a SCART connector off zuapfen).

What is it with the luma signal on the on green / blue is laid?
how accurate the color at all over?
it might be easier to just S-Video/Composite signal to use?
with a frequency for which the images are transferred at all?
what because of v / h sync to consider?

mfG sinistersnipe

Space


Antwort von oliver II:

Look here:

http://de.wikipedia.org/wiki/RGB

Space


Antwort von Alpinist:

"sinistersnipe" wrote: You need to have but I know exactly how an RGB signal is transmitted (do not know whether this is relevant, but I plan it out of a SCART connector off zuapfen).
http://de.wikipedia.org/wiki/SCART
That should have been but a good overview. Here is what Color s.den corresponding pins is transmitted. When it is finished, post some of our instructions ;-)

Regards

--
http://www.alpinisten.info/
http://www.gipfelsammler.de/

Space


Antwort von prem:

yes thank you, this article Ahbe synonymous but I have found. I am interested halt EXACTLY how the data are modulated

Space


Antwort von magic-lighting:

I think it would make is simply that not with a ¼P not realize, because most controllers are not in the position would be a Siganl with several MHz digitizer or entsehenden amounts of data to process. Moreover müsten the Horizotal or vertical signal yet from the Scart signal, which is just out of the 3 RGB signals with synchronization aufmodulierten signal to be filtered.

With a VGA signal could be something simple eiegntlich synonymous, because here all 5 signals are available separately. Simply each R, G and B, low pass filter and the voltage level at a driver of the Luxeon in brightness controls give. Is not frame accurate, but should actually work - even without ¼P.

Space


Antwort von sinistersnipe n/ angemeld:

I've considered the really synonymous with an operation amplifier should go on the first try I s.RGB from SCART, if not then stop VGA since then but I would need an adapter.

Are these vga -> s-video cable as what they are Hauf at ebay? wants no money for a real converter output.

grateful if

Space



Antworten zu ähnlichen Fragen //


ts-file reduce




slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash