Frage von Musashi:
Hi,
I have looked recently at Amazon, the
DCR-250 Super Macro lens of Raynox bought for my
HV20. Since the DCR-250 a 43mm threaded port owns, it can be applied directly to the HV20 Lens aufgeschraubt be. Product Of The Raynox is, however, the following:
It is necessary to RA5243A mount adapter ring (sold separately from us) when mounting the lens on the Canon HV20. Has anyone of you experience, whether the intermediate circuit of the adapter ring and thus the distance between the magnifying lens and Macro delivers better results than when using the Macro lens directly on the screws?
Thank you very much.
Gruß,
Musashi
Antwort von Andreas_Kiel:
It is necessary Hi,
that is "necessary", not "desirable". Presumably, the lens is calculated so that they are only in a certain distance from the lens works best. In order for multiple cameras with different lenses turn fits the adapter rings are required. Otherwise, there is at best a weak or faded picture, it might not even really focus.
BG
Andreas
Antwort von Musashi:
Hi and thank Andreas,
as I feared.
I had the macroblocks have already been tried times without power, but I was not quite satisfied. Focusing was very difficult and synonymous of Vergößerungsgrad was not as compared to pictures shown. Therefore synonymous with my demands and the Raynox Slashcam forum.
Almost all the reviews for the DCR-250 at Amazon (through the Bank 5 stars) were not of photographers and videographers and of course had the Lenses with larger diameters and therefore synonymous a corresponding adapter.
Well, then I will me the appropriate adapter ring to buy and try.
Gruß,
Another Bernd (Musashi)
