Frage von ropro:
\u003chtml\u003e Hello, \u003cbr /\u003e\u003cbr /\u003e Question one a.Capable Sachtler ACE Owner: \u003cbr /\u003e\u003cbr /\u003e I was able to test the ACE short tripod today, but had only my small, lightweight with HV30. This is me in the 1-3 Daempfungsstufen constantly noticed a slight Rueckfedern in the sense that I am waving while, take the power from the arm on which the image area (430mm at full zoom KB) noticeably retreated. Image stabilization was off, counter-balance to 0 \u003cbr /\u003e\u003cbr /\u003e Now of course, the HV30 is not the ideal camera for this tripod ;-) I use it normally on a Velbon DV7000, where the effect of spring-back does not drop as much (- which deserves sticks to the head after a few minutes). \u003cbr /\u003e\u003cbr /\u003e Does the ACE head with heavier cameras (XF100) better? \u003cbr /\u003e The
Antwort von ratoe66:
When extended? Then the twisted pieces of good in itself and must be released after the "twist" to reverse and then flutscht something back.
Antwort von domain:
This is in light metal and stands at this focal length completely normal. The tripod behaves as a torsion bar spring and a video head is no easy breakaway is not it, in other words, when standing, he a.Ende a pan remains did you still have a slight force to the first subsides completely when you leave out an arm. And then it just bounces back a little. In such cases you need a heavy tripod, with the wooden tripods springs generally less than metal tripods. \u003cbr /\u003e At the bottom, however, no problem, you can hear with the swing to a stop on and cut the last pictures go away.
Antwort von ropro:
Thank ratoe66 and domain! \u003cbr /\u003e\u003cbr /\u003e Well, yeah, the torsion of the legs, but only explains the horizontal Rueckfedern. The vertical is a property of the head. First and foremost, the warping of the plastic, I suppose it should be independent of the load. But perhaps it is with stress differently anyway ... Someone used his XF100/EX1/and Co. in the Ace-tripod? \u003cbr /\u003e\u003cbr /\u003e Domain, I'm filming Longer lectures, and must if you follow it gently moves the Spokesman, sometimes just a touch and there is the Daempfungsstufe an almost too strong. Since the system otherwise I like it, I will arrange myself in some way - the old Velbon hats helped to move the head and not directly a.Arm at a lower attenuation. \u003cbr /\u003e I'll keep a.Laufenden
Antwort von domain:
No, that is noEigenschaft of the head. But the tripod is more then just noTorsionsfeder but a general. It bounces in all directions, synonymous with vertical panning.
Antwort von Filmo:
The problem is always full extension and long telephoto, which you can manage something you might, is a triangular cloth between the legs and establish new something weighty is the combination hineinlegen.Dadurch a bit stiffer. \u003cbr /\u003e Maybe there is synonymous center brace for tripod said. \u003cbr /\u003e\u003cbr /\u003e Addendum: just see, is synonymous with execution ne spreader (MS), perhaps you can yes the upgrade, you should not already have something like ..
Antwort von nordheide:
This Rueckfedern I have been synonymous - when panning and tilting - \u003cbr /\u003e\u003cbr /\u003e http://forum.slashcam.de/next-vt95509.html?postdays=0&postorder=asc&&start=35 \u003cbr /\u003e\u003cbr /\u003e noticed. \u003cbr /\u003e\u003cbr /\u003e With the EX1, it is synonymous not much better - not synonymous with a carbon-Staiv. \u003cbr /\u003e Is probably a.Kopf and the handle.
Antwort von domain:
\u003cdiv class=\
Antwort von nordheide:
\u003cdiv class=\
