Frage von steptics:
hello slashcam maniacs,
I have been for some time on the search for a special tripod that I have ever seen synonymous, yet it is about one of two parallels with the poor who are connected through a steg, this steg the camcorder is attached. s. below low end of the two parallels is bolted to a floor tile. The clou is the poor, of course, can be moved. there explained that unfortunately can be difficult, I have prepared a sketch which will function as illustrated.
The red areas are to be mobile. My question now is to buy such and that he has such a tripod a special name so you could ask suchenn?
I thank you for your help
benjamin
Antwort von joerg-emil:
Hi steptics,
synonymous, I have no idea how hot the könnnte admit but interesting variant tripod, I have to. From what I know, this stabilizes the tripod camcorder only in the horzontal. Can the camcorder on the plate held horizontally to the front and rear tilt and swivel to the left and right?
I open up the indication, not quite. Due to the fixed ground connection one is indeed very limited. Be at this, what you want to use the tripod.
Gruss Jörg-Emil
Antwort von steptics:
The camera will only be moved upward and down to the left and right they should be fixed!
So the tripod with the bottom plate is mounted on a wooden board are holzbrett under the roll are permanently mounted so that it always pushed in the circle with fixed radius is stationary. With this 'camera car' will be filmed dancers in which they are orbiting. The optical wikt very good but the construction should be put in red s.den move the camera so you can always focus on the dancer and may vary slightly in height. optical effect, the very professional synonymous with commercially available camcorders.
thanks for your help
Antwort von pilskopf:
Is that with a Steadicam realize not much easy to use?
Antwort von joerg-emil:
.. how pilskopf suggests, I would think for such a project synonymous rather a Steadicam, especially since you do not plan to rely entirely on one floor, they'd be synonymous ... is much more flexible in handling ...
Antwort von steptics:
Many thanks for the quick reply, because the filming is done in anyway sporthallen is a steady-cam construction is not necessarily required!
But since you make this proposal, I was ironing board (on my moveable, is ready built) steadycamkonstruktion attempt a fix?
I was thinking there would only buy something like this and I miss just realized the need to find it.
I have tried tripod already synonymous with a tripod, but that is not readily adjustable during the filming.
gruß benjamin
Antwort von pilskopf:
But the construction is funny. If we were on the "Dolly" and then stand a push, or all alone? As much as I can imagine the order already.
Antwort von joerg-emil:
mmmhhhh .... of course, is angry that the skateboard have already finished. ... I would be interested to see if your skateboard, including tripod with a smooth ride riff of the camera. If indeed nothing more than a dolly with no rails ....
If so, and is the Konstrukiton massive enough, says ansich not mind tinkering, for example s.deinem standing on a skateboard tripod Steadicamaufhängung to one. For me, this could lead, at least in theory, an excellent result. It is very difficult to create with a steadicam in the hand while running on no-and down motion to .... but this construction would prevent ja ...
Antwort von pilskopf:
The on and off s.bekommst you but if you have a lightweight system uses. It is only s.Gewicht.
Which cam is filmed for?
Antwort von steptics:
So I'm filming with a Panasonic NV-GS320 Wide angle with vorsatzinse
I once grabbed the bottom board on the photos, the front is rolling three (free lenbar; deflection roller), the rear can be locked in position and almost jder can set the vehicle on a special radius ...
The dreibein was pretty shaky but it was synonymous nciht screwed but only to put!
how you is that with the Steadycam and einemdreibein before? sketches / photos and advice would be very welcome,
thank you very much
benjamin
Antwort von joerg-emil:
Ok, your skateboard not now looks like a very large Investion. And before you pursue this idea and invest in it next, I would advise you really time to test a Steadicam.
Here I have (once a very favorable model, 99 rausgesucht EUR) for your camcorder, but do not know it myself. For this you can build it difficult myself. And when it is absolutely not, there still 4 weeks, the conversion period.
http://steadydrive.com/site/shop/index.php?site=products&detail=12
A suspension of this type you can then stand even a try to tinker on your skateboard. Or do you use your tripod as a turtleneck with pure Dolly.
