Frage von rastyg:
Have a receiver with hard drive but unfortunately, no slot for the recording of a smart card has.
Is there a way to somehow decode the signal with an external smart card?
Antwort von StefanS:
Nachtigall, ick hör galumph you.
Is not always a trial subscription to the premiere of suitable receiver is missing?
Greeting
Stefan
Antwort von steveb:
if you still on telling us some technical data, the odds are not bad synonymous get a response that could answer your question.
zb
What receiver do you have?
ABO What do you have? etc.
Otherwise, I would time the mandatory criteria in google and banging when the receiver has no CAM slot becomes difficult or impossible ...
gruss
stefan
Antwort von Apprentice:
The receiver is of the firm Medion MD24080 with an RS-232 interface. I have a subscription from the ORF.
Antwort von steveb:
hmmm ... now why did you answer as a GUEST?
no preference.
A receiver without a CAM module slot is synonymous external (imho)
Encrypted no signal decode. A so-called external decoding hardware does not exist to my knowledge.
If your receiver has a record option, eg via Scart image signals to be fed, you could be an additional ORF procuring suitable receiver (no HD connected) and record the signal.
However, there was still a potential obstacle. Should the signal be equipped (from the 2nd receiver) with one Macrovsionsignal is synonymous with the analog recording nothing.
My recommendation: Technisat or Digistarreceiver with CAM option and an internal HD, plus a Alphacryptmodul. Costs about 200 ¬ and you have
for the future peace. Even if something should come a new encryption system.
There is now synonymous various receivers (Dreambox, and associates) working on Linux-based and thus provide an open system, which is updated constantly. This is still a piece of future-proof.
This is your problem not really the right forum ... look at times eg
www.hifi-forum.de
or synonymous http://forum.digitalfernsehen.de/forum/index.php
There are grazed by the SAT experts.
gruss
Stefan
