Frage von jmogk:
Hello and good day together,
I run s.der Panasonic DVX100AE an external Micro (; Panasonic AG-MC100, condenser microphone with XLR) connector. I am only now noticed a phenomenon, namely that the vibration of the autofocus motor in the Mirkrofonhalterung the external microphone transmits and creates an annoying sound in the recording, once appeals to the autofocus.
If I hold in my hand, and Micro is thus separated from the housing, the sound is fine. The fixture is original with Gummipölsterchen, really should not be so mechanical vibrations withübertragen.
Does anybody advice how to leave the (; additional padding, etc.) or someone is synonymous staying this problem before?
Greeting
Jurgen
Antwort von hofnarr:
o sometimes get rings in the area of the clamp agency be placed over the microphone a slight improvement. to take the fattest, which fit just by the outside diameter of the holder. For persistent cases, however, helps only a correspondingly decoupled micro-holding, if it is indeed a real physical sound problem.
Antwort von jmogk:
Hello Jester
Thanks for the quick response. So like I had synonymous presented the solution that'll go with foam, etc. The Micro in the cradle and wrapped reinschnitzen washers, shock absorbing material in the transition from housing to mount. Since the problem first appeared after 2 years, I thought synonymous, that the holder of the internal autofocus motor may be damaged and thus the housing transmits sound again, although I can hardly imagine.
In any case, I am testing the times with the above measures.
Thanks again
Greeting
Jurgen
