Frage von Trixi Hasselhoff:
Hi,
I turn to for a drive. Ie once the protagonists in the car through the windshield of round-the-hood and even from the viewpoint of the protagonists of the landscape, but not by through the window, but synonymous of the hood, so to speak out.
I will also use a Suction with a DV camera. Since the images but will contribute relatively quiet, I would have to somehow stabilize the camera still.
Unfortunately I have not yet found a combination of Suction and Stadysystem.
Has anyone had experience with, perhaps at doing this, or a tip for me?
Thank you very much!
Antwort von Blackeagle123:
Hey,
where you can buy something like this, I can not tell you unfortunately. Otherwise, if a DIY out of the question?
In the Sony Center in Berlin, there is a 3d movie. There, an SUV drives over rocks and all jerky. A camera is perfectly still, however, and runs after it. Are very impressive shots.
The guy is displayed, how it's done. Have a camera crane standing on a second car, s.dem a "dome" hangs. Looks like such a überdimensionalgroßer Football:)
This dome is the camera. This dome is the most expensive suspension systems all Ruckelbewegungen right / left stabilize / front / rear.
The same crane from the up / down movement on a second very aufwenidges system.
Such a system is of course extremely expensive and for no or low-budget films is not reasonable.
This is only time that you know how the professionals do in the movies;)
DIY instructions for Steadicams, cranes, etc. usauf you find http://homebuiltstabilizers.com/
(without www.)
Maybe you can even get you there suggestions!?
Many dear greetings
Constantin
Antwort von PowerMac:
http://filmeschauen.com/forum/viewtopic.php?t=10088&highlight=auto+16mm&sid=272cb34619c13402fb9c2fb16a4b2b91
Antwort von PowerMac:
Hey,
where you can buy something like this, I can not tell you unfortunately. Otherwise, if a DIY out of the question?
In the Sony Center in Berlin, there is a 3d movie. There, an SUV drives over rocks and all jerky. A camera is perfectly still, however, and runs after it. Are very impressive shots.
The guy is displayed, how it's done. Have a camera crane standing on a second car, s.dem a "dome" hangs. Looks like such a überdimensionalgroßer Football:)
This dome is the camera. This dome is the most expensive suspension systems all Ruckelbewegungen right / left stabilize / front / rear.
The same crane from the up / down movement on a second very aufwenidges system.
Such a system is of course extremely expensive and for no or low-budget films is not reasonable.
This is only time that you know how the professionals do in the movies;)
DIY instructions for Steadicams, cranes, etc. usauf you find http://homebuiltstabilizers.com/
(without www.)
Maybe you can even get you there suggestions!?
Many dear greetings
Constantin Are you sure that this was not Gocam? It rotates very fast and then removed all the stuttering
Antwort von mdb:
Are you sure that this was not Gocam? It rotates very fast and then removed all the stuttering When you order a gyroscope stabilizer mean synonymous while the camera must be movable so that the (or) the gyro stabilized camera.
There is a loose anti filter for VirtualDub, which is not bad. If we now turn to HD have sufficient resolution to reserve and then makes a software stabilization and Resolutionrunterrechnet to normal, this could be quite useful.
Antwort von tanuchin:
So I guess that you need no stabilization. If you move the camera relative to the car rigid mounting, does the Picture for the viewers quiet synonymous when the car is moving. I'm with one tripod in the car on the highway and tried out for city driving.
Even in rough terrain which should give a good picture. Assuming, of course, that the car, the camera is attached s.dem synonymous, even in the picture to see partially. But you had a plan, if I have correctly understood your post.
Antwort von Trixi Hasselhoff:
So: first thank you for your answers.
Yes is true for the part where the protagonists are seen through the windshield, it would indeed contribute really quiet when the camera is fixed.
For the other part, it would certainly be convenient if I turn on HD and then stabilize in post production. Especially since I s.Avid Media Composer and cut this "region stabilize" function is not as bad, although I would have then only the horizon as a reference. I could somewhat inflate the Picture synonymous etc. And later runterrechnen on normal television resolution, as the hands me forth from the result.
Antwort von beiti:
The film version, the driver / passenger through the windshield, I did once, years ago (then still in S-VHS):
I had built to a plate with cork edition, which was attached to the camera using 1 / 4 "screw. The record was on 4 short legs, their length was set so that we found the right angle. Between his legs and hood I had packed a layer of foam () to protect the paint and then the whole design with tension cables firmly lashed to the hood. Since the housing of the camera during the first test drives strong shaking, I still built on the left and right angle turn as bracing, so that the camera (a relatively high shoulder model) of the left and right was stabilized. (I hope that the description was understandable. Unfortunately, there is no Stillimage it.)
The camera design was in the middle of the bonnet and the display window was set so that the driver and passenger were seen simultaneously. As the sky reflections deteriorated a clear view, I also used a polarizer.
The results were very good after the end of the hair-splitting. However, proved to be the large building on the bonnet for a time as obstructing the view for the driver, in the hectic city traffic I would not dare to film with it. With today's small camcorders that will be easier.
Antwort von Markus:
As the sky reflections deteriorated a clear view, I also used a polarizer. This is a very important point! Without Polarizing the pictures look out of nothing.
One possible product for attaching the camera s.Auto would DVCarRig.
zum Bild
Antwort von Trixi Hasselhoff:
Yes this exact DV CAR RIG I wanted to use synonymous.
When polarizer I'm not sure. I think I know what an polarizer is there and what he does, but I've ever seen synonymous shots, who were without polarizer were rotated. They had hold its own character, because according to the sun on the way you could not see the protagonists, but reflected the environment, or it came to light reflections.
The actors have on the trip is important for me text and the landscape context of her because it would perhaps not turn bad without polarizing filters, I thought so.
I wonder whether there is a compendium, which flies at a non-ner's drive around the ears ... :)
Antwort von PowerMac:
I would just dispense with Suction.
Better rig right:
zum Bild
Antwort von Blackeagle123:
What is the difference between right and rig the DV CAR RIG?
If the DV Car Rig rigged properly "? :) Was not set ...
You know what I mean!
Love Greetings
Constantin
Antwort von PowerMac:
Oops! :)
With extra ratchet straps, fasteners, aluminum frame
zum Bild zum Bild
Antwort von Blackeagle123:
Yes, okay:)
The course is not bad!
I mean, who it has money ...
------------------
From next week I'm at 24 7medien, internship for 2 weeks. Vielleciht rig there are synonymous so;)
Which make the whole film for Pro7 / Sat1, etc.
I'm glad it:)
Love Greetings
Constantin
Antwort von Acer:
tell me, pointed at the ZDF was ...
