Frage von Franco:
I have a VHS VCR and an old television (no scart connection) with an antenna cable. This can easily watch videos. I now put the antenna cable from the house (cable TV) into the VCR, I have flawless TV Reception clean but no longer on the video channel. I've then re-set all other channels, etc. but without success. The strange thing is that until a few days ago, has worked flawlessly. Another VHS VCR I have connected to the test has the same problem. In the VCR manual says: "In connection without scart cable, it may happen that the frequency modulator of a TV is occupied and therefore interference can occur." Can someone help me?
Antwort von EMIL:
Hi Franco!
VCR manual says: "In connection without scart cable, it may happen that the frequency modulator of a TV is occupied and therefore interference can occur." Can someone help me? Furthermore, there is nothing here?
See once in the description if you think this is the modulator frequency is not using screw in the back or via remote control can adjust.
EMIL
Antwort von fernsehfritze:
You purchase a used PLEASE Television (p.50 euros) with Scart connection!
Can not be that someone in the age of HDMI, DVI and YUV still on channel 36 of its antenna signal.
That's like 10 meters through a garden hose Cocktial to drink!
If all the people with the old stuff satisfied, we would have the World Cup over the world pursuing the recipient!
If you have the charcoal test (which I did not expect, because you indeed have access to a second VCR did) or nostalgic reasons, and so no other want to use Television / can / can; normally should your VCR next to the UHF connectors have a screw, with those of Du channel 36 to another can switch to another Überschattung (new) transmitter to circumvent. If, however, that the new DVD recorders will no longer have, because no Manufacturer longer assume that someone used this Übetragungsvariante.
Antwort von prem:
Thanks for the tips, I have found no adjuster may, however, the menu on the modulation and an AND Modular off frequency (591 MHz) change. I have tried some other frequencies, however, without success.
What surprised me s.meisten is that without any changes by me suddenly no longer was. Is there a new channel (cable, I am with Germany) was added to the video channel and disturbs it previously did not exist or what can the explanation be?
For your answer:
Can not be that someone in the age of HDMI, DVI and YUV still on channel 36 of its antenna signal.
That's like 10 meters through a garden hose Cocktial to drink!
Basically I give you right. I've been using the television monitor rather than control for video editing s.PC. Incidentally, I look at surfing the Internet times synonymous television, radio and then instead, I had a VCR that is synonymous over before he connected dusty. So much for the explanation. What I take this opportunity would like to know why the TV picture is still on Antennkabel in a time of huge LCD and plasma screens with HDMI, DVI and YUV. Because most people use the devices primarily for television yes and only secondarily to watch DVD on finger-thick ferritummantelte goldbedampfte special cable.
Franco
Antwort von Markus:
Is there a new channel (cable, I am with Germany) was added to the video channel and disturbs it previously did not exist ...? Yes, maybe. What does cable to Germany?
Antwort von zaphod_42:
Strange - I have been a few days exactly the same phenomenon: all the channels work flawlessly, only the channel 36 (VTR) is overlaid with some "interfering". I too am with Kabel Deutschland ...
Is there new evidence of Franco (maybe cable of Germany)? Please log. Thank you!
Wolfgang
PS: my fairly old Television has even SCART - works but not enough about me and so far the coax connection. Channel 36, I unfortunately do not move - no set, no (working) menu, although the user manual.
Antwort von bluec:
Since mid-December had the same problem - Channel 36 is by a signal from the cable network of Germany superimposed.
So far only one suspect has been just during a visit to the shop confirmed. The whole thing seems to go with the shift to the DVB cable network (eg room Regensburg s.6.12.) Hand.
One possibility is, of course, the signal is simply no longer on the RF modulator to send to the television.
How does that work, however, if the VCR s.einen end of the living room stereo s.der has the Television jedeoch s.anderen? - And then a second television in the bedroom, where one of the tapes through a radio / IR Converter fernsteuerte.
Went so far at any rate all of the trouble-free. UNTIL NOW.
Not anymore thanks to Germany and the cable SUPERNEUEN technologies !!???? (eg DVB-T)
Greetings from
Regensburg
