I have several microphones, among others, a Sennheiser ME66, Rode NTG-2 and NTG-3.
With my Sennheiser ME66, I noticed that the Microphone overloaded.
Since I still synonymous in other microphones will define the future me, I would like to self-diagnose any errors.
Is there a test device for microphones, which I / oversteer can diagnose a defect? How do the workshops? What do you need? A test program for my computer?
Thanks in advance schonmal.
nice greetings Paul:)
Antwort von Pianist:
"Paul R." wrote:
With my Sennheiser ME66, I noticed that the Microphone overloaded.
However, this is probably not at the microphone, but the subsequent recording device. Cause could be: The ME66 with K6 is a relatively strong low-level, so are not many devices of the lower segment clear. Therefore, there is the module K6CL with reduced levels. Just try it.
Matthias
Antwort von Paul R.:
Hi, thanks for the quick response. :)
I use the Sennheiser ME66 normally s.einer SonyFX 7 or SonyHD1000. And for both, problems occur ...
Antwort von Pianist:
"Paul R." wrote:
I use the Sennheiser ME66 usually at a 7 or SonyFX SonyHD1000. And for both, problems occur ...
Yes, but with which supply module? K6 or K6CL?
Matthias
Antwort von Paul R.:
The K6, so I have to look around even after a K6CL ...
Antwort von handiro:
can be synonymous either -10 or-20db reduction in between hang ..... are prefabricated in the cable ...
Antwort von videochris:
Hi Had a former ME66 + K6 have an Canon XM1 and XM2 these cameras for a Mikrofonabdämpfung that could turn on the menu may have your Sony synonymous such a mic attenuation?
