Frage von stevenk:
Yes, I know that I have an external Micro MV 600i Canon s.meine must connect to - I did not.
I was synonymous my own sound engineer / cameraman and did with my cam in front of the stage, on stage, between the musicians synonymous times out and her wandering blithely recorded.
When the sifting of the raw material, I noticed that a relatively strong Tonschwankungen (loud / quiet) were on the audio. I do not change eg when around on stage, but when taking pictures of a fixed position.
Can this be caused by the electronics of the amplifier anywhere rumstanden?
In another event in the open air, without electronics, I have the same cam with good results (synonymous without ext. MicroStation). On the Cam, the problem does not lie.
Weiss anyone advice?
Antwort von kowi:
sorry, forgot me to log in.
Antwort von Schleichmichel:
Your Camera pegelt car and the sound in quieter passages raises the level s.and lowers him in loud passages. Depending on the event interferes with the sound more or less strong and sound and is totally amateurish. Perhaps the other shots were not so bad dynamic, such as tape and are therefore not become so bad.
An external microphone as synonymous saves nothing, since most camcorders in the lower price segment, no manual sound level is foreseen. Neither the internal nor the external microphone. The effect would therefore have been the same.
The Sound of concerts takes you directly s.besten of the engineers who s.Mischer sit. They have a two room microphones for the applause to the mix ...
Antwort von kowi:
Thank you for your reply.
So my next ussicher Cam has a manual Tonregelung.
