Logo Logo
/// 
Zwei HVX200 mit einer Fernbedienung steuern ?

Two HVX200 with a remote control to control?



Frage von dcmbeat:
Oktober 2008

Hi,

for stereoscopic images, I am in search of a solution, I believe both simultaneously HVX200 with a remote control can control, so REC / STOP, Focus / Iris and Zoom. (I do not mean the wireless remote control, but the wired, eg VariZoom)

Has anyone ever tried? Someone a hint or an idea?
Danke, Gruß DCM



Antwort von Johannes:

In theory you need only a small power of 2 small jack on jack then some of the connecting cable and it should go.
The size of the jack connector, I have unfortunately not in the head. Such a power should have any electrical store or order it online.



Antwort von dcmbeat:

thank johannes!

to my question as to whether the signals could split the controller replied to me that the friendly customer service panasonic following:

Camera remote control circuit outputs DC voltage to focus / iris s.well s.zoom connector, and then monitor current and DC voltage level returned from remote controller.
Direct connection of one controller to more then one camera would cause shorting circuits of cameras resulting in camera's malfunction or failure.

my English and my technical skills are unfortunately limited, but what I understand is that current and / or voltage change by then, if you split the cable, no longer in a situation, the cameras correctly to navigate!

what do you mean?








Antwort von Johannes:

Such an adapter will cost 2 euros cable synonymous again 5 euros.
It is not the world, certainly not for a HVXuser.
So just give it a try. But in principle it should go.



Antwort von dcmbeat:

as I said, it will not work, see the information-panasonic customer service.

gruß



Antwort von raymaker:

"dcmbeat" wrote:
thank johannes!

to my question as to whether the signals could split the controller replied to me that the friendly customer service panasonic following:

Camera remote control circuit outputs DC voltage to focus / iris s.well s.zoom connector, and then monitor current and DC voltage level returned from remote controller.
Direct connection of one controller to more then one camera would cause shorting circuits of cameras resulting in camera's malfunction or failure.

my English and my technical skills are unfortunately limited, but what I understand is that current and / or voltage change by then, if you split the cable, no longer in a situation, the cameras correctly to navigate!

what do you mean?

If it is true what the Pana Service says you can bend it. Pana warns synonymous front of a short circuit, which then of course not covered under warranty.



Antwort von dcmbeat:

yo, so finger away and continue looking for ... : (((



Antwort von domain:

Are you really the whole very complex problem of stereo recording conscious? Since there is specifically designed with specialized providers exactly concerted pair and camera control units such as
Only this time as two examples of typical problems in stereo: the two HVX200 for example, can not be so easy to assemble side by side, much too large distance for normal shots, or as one more thing: for any given distance, the two cameras so practically squint to be particularly course in close-ups.
So the problems are so diverse that you really should google times, in order to get the full scope to be clear, otherwise only ever botch out.



Antwort von dcmbeat:

Thank you for that answer.

obviously I am aware of the problem. but it seemed sensible to me to be a small problem here part time post, as the production of many ask in a thread aufeinmal them.



Antwort von domain:

Then ists so good.
What the Lanc port affects so does my knowledge, not so that different functions so with virtually Leiterdrähtchen be different, but rather on client-server basis. All commands are transmitted over the microprocessor of the Lanc-Steurgerätes as a coded bit stream s.die Camera forwarded.



Antwort von dcmbeat:

ok
LANC retires but anyway, because of the hvx it is not supported



Antwort von domain:

ZOE-DVX also works on the same principle ;-)








Antwort von dcmbeat:

I do not know, but if you're saying.

brings me but not next, because it all just for a remote cam there, unfortunately not for two, have been synonymous with bebop and VariZoom requested.



Antwort von handiro:

I do believe that an accomplished electrician could avoid a short circuit, but is likely to be expensive. If tensions flowing because you can with the safety filter / block was always synonymous.

But times the question differently: why are you star it is not in a row? in the NLE can they then but on each other or pull?



Antwort von dcmbeat:

because in the post only shifts of 1/25s (or 1 / 50 at 720/50p) can be approximated.
due to the fact that both cams, but not synchronize record line by line, it quickly shifts much smaller than the 1/25s are, especially at fast bewegeungen destroys any stereo copy.



Antwort von handiro:

but the HVX but studiofähig should be I thought? as they can or Genlock?



Antwort von PowerMac:

"John" wrote:
Such an adapter will cost 2 euros cable synonymous again 5 euros.
It is not the world, certainly not for a HVXuser.
So just give it a try. But in principle it should go.


Please do not reckless statements on a young person to hear.



Antwort von dcmbeat:

no, the HVX is not capable gennlock ...

...

klaro @ powermac



Antwort von Johannes:

"PowerMac" wrote:
"John" wrote:
Such an adapter will cost 2 euros cable synonymous again 5 euros.
It is not the world, certainly not for a HVXuser.
So just give it a try. But in principle it should go.


Please do not reckless statements on a young person to hear.


Please do not red at the traffic lights junction go, THANK YOU!

He did understand Now. You're such a man synonymous
in an alley signs like: "Please do not go against the trees' aufstehlt.




Antworten zu ähnlichen Fragen:
remote control - app - touch fokus
colorsynth-plugin-and-codex-keys-control-surface
Motion Control Baukasten für Product Shots
ATEM Mini Extreme - keine Camera-Control
Teleprompter mit Autocue und Voice Control Deutsch
Field Monitor mit Camera Control für Canon R5C
Aktualisierter edelkrone Controller v2 - jetzt auch kabelbasierte Motion Control
Syrp Genie One: Motion Control für Kamerafahrten oder -schwenks
CDA-TEK 3C Cinema Camera Control v1.4 unterstützt Tilta Nucleus Nano
Teradek TOF.1: Infrarot-Entfernungsmesser für das RT Wireless Lens Control Kit
Teradek: Zubehör für RED Kameras und neues Lens Control System // IBC 2018
Atomos: Neuer Shinobi 7 HDR Monitor mit 2200 Nits, Touchscreen Camera Control, SDI uvm.
RED Control Pro App - erweiterte Bedienung von V-RAPTOR und KOMODO für 500 Dollar
Video: DOP Ben Davis über Motion Control, (SET)Licht, Film vs Digital u.a. in Dr. Strange (MARVEL)
Ronin S auf Slider = Motion Control Slider?
Hvx200 Pufferbatterie?
Suche Fisheye für Hvx200
Hvx200 Zoom Hebel geht nicht ?
Remote Arbeiten
Remote bedienbare Kamera?
Professionelle Remote APP 8,99€
Ronin-M Remote-Probleme - FIX
Nikon MC-N10 Remote Grip
Remote Head für Jib
Remote Voiceover Recording Software - Empfehlungen?
Fujifilm Camera Remote 4.0.0 for Android Released

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
KI
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos