Infoseite // Update Premiere 1.5 to 2 then DV device is not detected correctly, HELP!



Frage von Mephisto123:


Hello!
I updated to Premiere Pro 2, on 1.5 ran with the super capture everything (I have a DV recorder Panasonic AG-DV2700, really 2700 not 2500, because of what komaptiblität again is difficult). After the update is true that I've made through the premiere Geraäteseteuerung and the brand, actively control console, but above the message "recorder can not be activated and should be reset.
I can not play the tape through the console, but it does not appear, first and second picture are doing nothing, when I press the Record button.
Serve me the tape and do not put the DV recorder to an external signal (on camera connected to AV3) also appears there is no picture and nothing will be recorded.

Someone with experience sowas?? What can I do?
Adobe pushes it to Panasonic, Panasonic says software error, eh difficult with such an "old equipment".

Nebeninfos:
WinXP MUI
graphics card ATI Fire glx1
DV connection previously only went with intermediate repeaters
Firwire motherboard's on-board Thyan Thunder I7505 U265
Recorder Edit Control is set to "DV-Passive"

Would be ultra cool, because if someone was clever to know, did not really synonymous quite of the Project update, but somehow you never no Project open ...

bis denne

Mephisto

Space


Antwort von mkrawietz:

Hab grad test: With the video Capture.Wizard of Windoze you have both intact and preview synonymous recording function.

Mephisto

Space


Antwort von mkrawietz:

Nevertheless, what can I do with Premiere?

Hello?

Space


Antwort von mkrawietz:

Has not helped synonymous:

Error "Can not activate recorder. Try resetting camera" when you capture video (Premiere Pro 1.5, Premiere Elements)

Issue

When you attempt to capture DV or HDV footage in Adobe Premiere Pro or Premiere Elements, you receive the following error message, activate "Can recorder. Try resetting camera."

Solutions

Do one or more of the following solutions:

Solution 1: Log onto the system ssAdministrator. (Premiere Pro 1.x, Premiere Elements 1.0)

If you are logged onto the computer system with limited administrative rights, log onto the system sa user with Administrative privileges, start Premiere Pro 1.x or Premiere Elements 1.0, and initiate the Capture Window. Limited users may then log onto the system and capture without further errors.

Solution 2: Disable any non Microsoft DirectShow Video Capture Sources filters on your computer. (Premiere Pro 2.0, Adobe Premiere Elements 2.0)

Third-party DirectShow Video Capture Sources filters may interfere with the ability of Premiere Pro 2.0 or Premiere Elements 2.0 to capture from DV or HDV sources. Check to see if you have any non Microsoft DirectShow Video Capture Sources filters installed on your system and disable them. If your DV device status is listed as "Detected" in the DV / HDV device control options, it is likely that you have a third-party video capture source filter installed on your system

To check for and disable third-party party Video Capture Sources filters:

1. Download and install Microsoft GraphEdit to view the DirectShow filters on your system

2. Open GraphEdit and choose Graph> Insert Filters.

3. Navigate to Video Capture Sources in the list of filters.

4. Expand Video Capture Sources to view the filters installed on your system

5. Expand the Video Capture Sources individual listings to identify the file names of the filters installed on your system

6. Navigate to those files and change the file extension to. Old.

Note: Premiere Pro and Premiere Elements use the Microsoft file ksproxy.ssthe video capture source filter to capture DV and HDV files. Do not disable the file "ksproxy.ax.

Solution 3: Modify the setup menu of your HDV device to output the appropriate video format. (Premiere Pro 2.0, Adobe Premiere Elements 2.0)

If you are attempting to capture HDV footage from your HDV device, the internal menu setting of the device must be set to output HDV. If you are attempting to capture DV footage from your HDV device, the internal menu settings of the device must be set to output DV. The automatic, or CAR, format output selection setting for HDV devices may not be reliable. The format output setting should be set to either HDV or DV, not AUTO. For instructions on how to change the output format setting, see the device manufacturer's documentation.

Note: If you are using a Sony HDV device and the internal menu setting for i.LINK CONV is set to ON, The Sony HDV device will convert your HDV material to DV on output. You can not capture HDV footage if the i.LINK CONV setting is set to ON.

Solution 4: Remove third-party DirectSound audio filters from your computer system

Some third-party audio filters may interfere with the ability of Premiere to capture video. Two DirectSound audio filters that are known to interfere with video capture in Premiere are the TFM Audio Filter and the Morgan Multimedia Stream Switcher. These filters may have been installed independently or s.part of a codec pack and may be removed using the Add / Remove control panel in Windows XP.

Solution 5: Refresh the IEEE 1394 device listings in the Windows registry.

Disclaimer: The registry contains system-related information that is critical to your computer and applications. Before modifying the registry, be sure to make a backup copy of it. Adobe does not provide support for problems that arise from improperly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For information on the Windows Registry Editor, see the Windows documentation or contact Microsoft Technical Support.

To refresh the IEEE 1394 device listings in the Windows registry:

1. Open the Windows Registry Editor by selecting Start> Run

Space


Antwort von prem:

Sorry, but, one of the last procedures, it was, I believe that with the registry. Then: Premiere show, THEN Aufnhemen-turn window open, THEN machine and wait for Windows asks what you did so now, (WINDOW NOT click away! Specify) but Premiere, dann gehts 100%

Was it now all a momolog, but maybe they will at some point, another desperate AG-DV2700 owners save this post and a few gray hairs, and heartburn in the middle of Project.

bis denne

Mephisto

Letztenz I've seen your review, which was then the s.zweitlängsten unbenatwortete (2001-2006) who finds the longest monolog? Please enter necessarily know: ckontakt_at_web.de

Space


Antwort von Amani:

Mephisto wrote:
Was it now all a momolog, but maybe they will at some point, another desperate AG-DV2700 owners save this post and a few gray hairs, and heartburn in the middle of Project.


One has found him before!
While I do not have a AG-DV2700, but a Panasonic NV-DS60 - but
I had the same problem as you
Through your possible solutions I could circle the problem.
Ultimately, it was running at me s.störenden filtering the tsunami filter pack.
After his removal in my case everything is running perfectly!

Amani

Space


Antwort von prem:

Quote: Ultimately, it was running at me s.störenden filtering the tsunami filter pack.
After his removal in my case everything is running properly

One only needs to regulate s.The hold, then slap synonymous!

Space


Antwort von Amani:

Quote: One only needs to regulate s.The hold, then slap synonymous!
I do not understand.
Concretises your evidence please!

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash