What kind of microphones can be connected s.eine Canon XL1s (except the Japanese)? It has a 3.5 jack for an audio and two RCA audio inputs for second I assume there are only dynamic microphones. I want me a solder adapter with a female XLR-Male.
Thank you.
Antwort von srone:
There are synonymous microscopic capacitor, you should pay attention only to the fact that they get their supply voltage from an inter-battery. eg rode NTG2.
and of long cables (up to the micro-holder on the camera!) I would advise in such an adapter solution, the shorter each trouble-but if you make hand soldering you did so in the.
lg
SRone
Antwort von Dexter:
Thank you for your reply. I am just not quite clear how many microphones are usually connected. When the jack is only one, of course. But in case the RCA inputs, I do not know if there a total of two microphones can turn or only one. is in the manual:
Does "two sets" that can be connected as two? It would be nice if my question could be answered. Thank you.
Antwort von srone:
"Dexter" wrote:
I am just not quite clear how many microphones are usually connected. When the jack is only one, of course.
wrong, the stereo jack is unbalanced (3-pin), a xlr-plug mono balanced (also 3-pin). you do before you solder on the exact wiring symmetric <-> unbalanced smart, you could cleverly constructed via two xlr adapters synonymous microscopic s.die anschliesen jack (3.5 mm stereo plug to 2x xlr-female), but then please ensure that adequate strain relief otherwise the small jack out quickly.
The cinch inputs are in the regular line-level only could, but because of the XL1s separately available adapter ma-100 xlr-uu be different.
lg
SRone
Antwort von Dexter:
Aha, that would mean that in principle four microphones could be connected: the built-in Japanese, two microphones in the jack (Audio 1) and two RCA jack for audio s.jeweils a second According to instruction of all the audio outputs can serve as inputs synonymous. With the RCA jacks Audio 2-Line devices can be connected via microphones and shoulder pad, as you noticed correctly. It captures most of then more than 2 microphones simultaneously. What would be the case but with two microphones connected s.der jack? This then would be a mix, right?
Could I solder that is, two adapter? With a jack plug to 2x XLR-Male and female of a 2x RCA to 2x XLR female? Have I understood correctly? Sorry for questioning but I would not do anything wrong.
Antwort von srone:
So 4 is not mikros if you only have a stereo track to record, an internal mixer is probably synonymous not present, so that you remain two of which landed the one on the left and the other on the right track, both in mono. s.welchen entrance you go now is up to you, for more practical, I would now hold the cinch input to be used separately as two adapters (cinch <-> xlr) are much meaning as one, and the cinch socket mechanically stable than the phone jack is.
