But now to me to ask some questions because I do not have much experience with microphones:
1. When I look at the microphone up there bid, do I have to buy me something else? Or am I so then fully operational, and it can easily connect s.meine Cam and losfilmen?
2. I know the microphones in such a way that usually need one amp, as you hear nothing else .. what is the situation here?
3. What else is there to consider?
Antwort von musk74:
Hello! Yes, the ME 64 is a good microphone that is certainly a Kondensatormic. So it requires phantom power or battery operation.
It requires 48V phantom power either to or power adapter for the Battery.
Sound really OK!
Antwort von Pillermännchen:
Ich habs synonymous. The thing is upper middle class and absolutely for commercial use. The output level is more than adequate for your cam.
What Michael says is true. You still need a K6 power adapter. http://www.sennheiser.com/sennheiser/home_de.nsf/root/professional_wired-microphones_camera-mics_k6-series_003279 Did you this, you will soon learn of Sennheiser Mics synonymous with industry and other characters () ball to leg.
Therefore prefer to look after a complete package with adapter.
Make sure that you are no ersteigerst no internal battery. The gibts fact synonymous. In that case you can not run directly s.Camcorders the mic, but still need additional clutter.
In addition, you still need an adapter cable of XLR (Female) to mini-jack (male).
Take a check with Thomann. They have something like that.
Antwort von bjelgorod:
You have chosen because you have a good and got himself the 66th ME Clasp me to the advice of others. I do not know your camera, but to correct the Micro uses can, you should let the audio levels s.der Camera manual setting, since there is a directional microphone.
Antwort von pilskopf:
Weight 35 grams?
Antwort von Bernd E.:
... Therefore prefer to look after a complete package with adapter ...
If you the Sennheisersystem then becomes too expensive - the power adapter will cost at least $ 200 s.The again - then look at the alternative of Rode NTG-2 to: http://www.thomann.de/de/rode_ntg_2.htm As for the aforementioned adapter cable, as this has proved very good: http://www.thomann.de/de/cae_20035_kamerakabel.htm And in case you want to mount the mike on top of the camcorder, to this is a shockmount like this one: http://www.thomann.de/de/beyerdynamic_ea_86.htm and an adapter for the little Sony accessory shoe to do so.