Frage von Kakoe:
Hi,
I am looking for a video tripod, which I well get clean in a backpack, so can take with on trips.
I had the Manfrotto 936 or the Velbon DV-7000 in mind, but I have unfortunately too large. Of course, there is probably no smaller serious video tripod, but you can buy the head of the synonymous Biloras alone. Now my question would be whether one because this s.einem smaller tripod, such as the Manfrotto Travel A could use 245th
Antwort von mann:
http://www.manfrotto.com/product/8374.76909.14988.0.0/679B/_/Three_Section_Monopod
Antwort von Kakoe:
http://www.manfrotto.com/product/8374.76909.14988.0.0/679B/_/Three_Section_Monopod A monopod for video??
Antwort von B.DeKid:
Manfrotto 055XPROB (gibts synonymous carbon) to one of the video heads
for example, the 701HDV
Antwort von Bernd E.:
A monopod is sometimes useful as a stopgap measure, but I would not bet on the start of a workaround. A compact tripod better fulfill its purpose, and thanks to the standard thread is synonymous should be no problem to mount such as a Manfrotto Velbon head on-legs. Eight simple fact that both have the same thread - almost always 3 / 8 in. - have, then it'll work.
Antwort von Kakoe:
Manfrotto 055XPROB (gibts synonymous carbon) to one of the video heads
for example, the 701HDV OK
I should say that my budget is so around 140 ¬.
And the Manfrotto is but I think a little too big ...
Antwort von B.DeKid:
That is for about 180 ¬ with the 804RC2 head I find very good for the http://www.amazon.de/gp/product/B000YMBR06/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=471061493&pf_rd_s=lpo-top-stripe&pf_rd_t=201&pf_rd_i=B000TSHPCO&pf_rd_m = A3JWKAKR8XB7XF & pf_rd_r = 01APK9NJC1DXDR9HMWMZ
If the Mittelsaeule kippst can even bridges so silently,-P
.......................
@ Bernd
The Manfrotto is half the sound so it will be more tricky with the change of heads
Antwort von Kakoe:
A monopod is sometimes useful as a stopgap measure, but I would not bet on the start of a workaround. A compact tripod better fulfill its purpose, and thanks to the standard thread is synonymous should be no problem to mount such as a Manfrotto Velbon head on-legs. Eight simple fact that both have the same thread - almost always 3 / 8 in. - have, then it'll work. The problem is, the above tripod has a 1 / 4 ". What it is because for small alternatives with 3 / 8" thread?
Antwort von B.DeKid:
NEN Gorillapod is small tripod but one can take advantage of all the most as a shoulder support.
http://joby.com/gorillapod/video/
Antwort von Blackeagle123:
For example, a 1 / 4 to 3 / 8 inch adapter. Since 3 / 8 inch larger, that's even relatively easy. This keeps the head, but must have the tripod screws to fix the head again.
I would recommend you definitely something more to spend and, for example, the 701HDV or to buy the 700RC2.
Greetings!
Constantin
Antwort von Kakoe:
I would recommend you definitely something more to spend and, for example, the 701HDV or to buy the 700RC2.
Constantin I'll think over the head again, but I want to decide first what I for one, as small tripod to take.
Antwort von Bernd E.:
... The problem is, the above tripod has a 1 / 4 "thread ... Are you sure? Tripods usually have a top 3/8-Inch-Schraube to which the head is mounted, and the head did turn up a 1/4-Inch-Schraube (usually in a quick release plate), which is rotated in the camera. The information provided on the homepage Bilora the A245 is no exception, an adapter, you need not so sure. Or the Velbon head below should have only one 1/4-Inch-Gewinde?
Bernd ... ... @ The Manfrotto is half the sound so it will be more tricky with the change of heads ... Sorry was a little unclear: I was referring to the 245, not the 936th
Antwort von Kakoe:
... The problem is, the above tripod has a 1 / 4 "thread ...
Are you sure? Tripods usually have a top 3/8-Inch-Schraube to which the head is mounted, and the head did turn up a 1/4-Inch-Schraube (usually in a quick release plate), which is rotated in the camera. The information provided on the homepage Bilora the A245 is no exception, an adapter, you need not so sure.
May be this is not true, I think I read somewhere.
Ahja standing here in the video description:
Antwort von Bernd E.:
Hard to believe what dealers make all online. Such a bad product video I have not seen for a long time. But yes we are interested now only the screw. At about 1:45 running time is to see how the head is screwed off, and it is indeed the case as suspected: The head is mounted with a 3/8-Inch-Schraube, so watch each other head, which is also a 3 / 8 has-inch thread in the soil.
Antwort von Kakoe:
Hard to believe what dealers make all online. Such a bad product video I have not seen for a long time. But yes we are interested now only the screw. At about 1:45 running time is to see how the head is screwed off, and it is indeed the case as suspected: The head is mounted with a 3/8-Inch-Schraube, so watch each other head, which is also a 3 / 8 has-inch thread in the soil. OK that's not bad. Do you suppose that the tripod is suitable for approximately synonymous 1Kilo severe head and a 550d?
Antwort von B.DeKid:
How, then one on youtube already wrote "... too shaky"
Should we stop we'll see in practice
MfG
B. DeKid
Antwort von Kakoe:
OK
I think I'll buy first then just go a head and then that of Saturn.
