Logo Logo
/// 
Zubehör für Canon XL H1

accessories for Canon XL H1



Frage von Craven:
Juni 2008

Search for a documentary, I do on the XL H1 will still shoot well following appropriate accessories:

1. Mattebox including Rods and follow Focus
2. ND3-9 filter, polarizer
3. Fluid Head & Tripod
4. Zoomgriff
5. Shoulder restraint or evtentuell EasyRig

Bin for experience from your work appreciated. Turn for the first time with the camera and thus have no good setup in the wild can test.



Antwort von B.DeKid:

Gude

So double-ge "post" does not improve

Accessories to your questions:

1. Need not .... who is the first time with such a camera is filming and then Fussi Action is with the AF function of the camera serviced. The sun visor of XL1H is synonymous already sufficient.

2.ND filter is installed - you do not reads manuals? Pol filter? For what - need not be synonymous. Nen, the UV filter to protect it have. Since NEN take the B & W is ok.

3.Na if the company does not have the thing which you borrow, but hello .... what do you like about this one rates? Nen Sachtler perhaps?
If you clear the NEN correct some measure the same time you head NEN few hundred euros, or? Go look at the



Antwort von r.p.television:

1. The 450er of Chrosziel HDV kit is the best. Even if a WW-converter is attached because the WW-6x Lens is elusive - is essential.
2. The ND filter built-in combination with a lower shutter speed should actually synonymous with High Noon in the Sahara rich. If you have ND-filter my test: TIFF. The only thing I'm going to recommend. But cost 200 euros apiece.
3. Kuck times when www.vcm-markt.de. They have a 1000-euro-Sachtler replica (the original cost of more than 2000 euros). Is highly recommended. It's best to call and specifically ask for it.
4. You do have a rear camera operator? For those of Manfrotto Camera only recommended. This is really very good.
5. The shoulder shooter the Canon is not really a good one. I got in my stand a fixed long plate and including a further shoulder pads out of a damaged DSR-300. The mounting adapter for Battery & Co, I have a 2 kilo heavy lead (Panasonic) for the light's head mounted. I have a weight balance like a real camcorder shoulder a la Betacam SP.








Antwort von Craven:

"B. DeKid" wrote:

.................................

Here it seems to me like you just NEN Movies film .... BUT IT IS NOTHING.
A THICKNESSING to do with equipment is not the final one.
And 'Sorry but I hardly remember that you really the "right" man for the job.
................................

Firms to lend and sollches Equitment chen is alleged PROFIS cameras should lend previously NEN test times with the people make.

Kopfschüttelnder way
MfG
B. DeKid


Without now on everything you've written in detail to want, but a few points. I turn on the camera for the first time a project of this magnitude. Do so here I am on a few things informed. That one is so synonymous quite informative and can get good answers, yes rptelevision and shows you so synonymous in the approach. So just let the self and keep your focus on qualitative answers, even if you take the time what to write.
My two questions are in fact different, not necessarily a double posting.
To your answers: obviously you have a different way of working than I do. I have recently staged some projects on 16 & 35mm rotated and am therefore naturally accustomed to a technical effort, which is a documentary on video inappropriate. So yes, I ask here!
Nevertheless, I work professionally and because the question arises as to whether I use a polarizer or do not, and simply moving garnicht. So the question is simple: what Mattebox and the filter for the camera are well suited. If you recommend something to me can be happy. But please tell me nothing of a Canon lens hood and autofocus. Finally, short for shoulder support. Of course you can shoulder the camera, but my previous impression was that they are not very well balanced and that is why I am looking for an alternative.

"rptelevision" wrote:

1. The 450er of Chrosziel HDV kit is the best. Even if a WW-converter is attached because the WW-6x Lens is elusive - is essential.
2. The ND filter built-in combination with a lower shutter speed should actually synonymous with High Noon in the Sahara rich. If you have ND-filter my test: TIFF. The only thing I'm going to recommend. But cost 200 euros apiece.
3. Kuck times when www.vcm-markt.de. They have a 1000-euro-Sachtler replica (the original cost of more than 2000 euros). Is highly recommended. It's best to call and specifically ask for it.
4. You do have a rear camera operator? For those of Manfrotto Camera only recommended. This is really very good.
5. The shoulder shooter the Canon is not really a good one. I got in my stand a fixed long plate and including a further shoulder pads out of a damaged DSR-300. The mounting adapter for Battery & Co, I have a 2 kilo heavy lead (Panasonic) for the light's head mounted. I have a weight balance like a real camcorder shoulder a la Betacam SP.


Thanks for the answers! I am, however, my question is somewhat ambiguous terms. I will not buy the equipment, but to rent. That means that I have just the list for the production company to create. Because the financial aspect is just secondary. Good light and possible equipment should be. But I still have your answers helpful, as far as I found anything. Up on the shoulder restraint, because I will probably like you and do something myself tinker. However, this sounds "Turtle X System of EasyRig synonymous quite exciting. Have you been so random experiences?



Antwort von Andreas_Kiel:

Hi,
just so s.Rande: even longer Postings by a continuous small letters illegible. So it is not "unkewl", the uppercase letters to be used, but an act of courtesy to the reader.
BG,
Andreas



Antwort von Craven:

"Andreas_Kiel" wrote:
Hi,
just so s.Rande: even longer Postings by a continuous small letters illegible. So it is not "unkewl", the uppercase letters to be used, but an act of courtesy to the reader.
BG,
Andreas

Asking for forgiveness. Have my two fingers again to correct Round skillfully. :-)



Antwort von r.p.television:

Is obviously stupid for a camera borrowed so much work into a balance to be stuck. Exists in any case to the mounting screw mounting adapter that shipped with the camera and is supplied with three screws s.Heck camera attached.
I then s.einen expensive about 30 euro lead a plastic plate and glued those with lateral holes s.diesem adapter mounted by bolting.
Tripod plate should have a SONY VCT-U14 (I think) s.den TA-100-adapter (should ideally be optionally mounted on the distributor) of the Canon fit. The tripod plate is then referred back enough meat to have anything with Velcro on it as a pin cushion to be able to, because right on the shoulder is such a tripod plate unattractive.
The camera is with a matte, Rodssupport, tripod plate and lead twice as heavy as before, but does the camera work just fine.

PS: Maybe you can the lender elicit a discount if you spinning it a ready Schulterset zurückgibst. My setup has already copied several 1:1, because only by the camera on the tripod as synonymous of the shoulders make sense to use.




Antworten zu ähnlichen Fragen:
Verringert 4K-Crop für Canon R -- neuer 0.71x Metabones Speedbooster Canon EF auf RF
Canon präsentiert die Canon EOS R3 - Stabilisierte Fullframe 6K Videos mit 60p RAW
Canon EOS Kameras als Webcam mit neuer Beta Software von Canon
Canon auf der NAB 2018: Canon EOS C100 MKIII vs Vollformat Spiegellose ?
Messevideo: Canon Sumire - erste Canon Vollformat Cine Objektivserie mit PL Mount // NAB 2019
Canon EOS R5 Firmwareupdate 1.3.0: Canon Log 3, Cinema Raw Light und IPB-Light in der Praxis
24 fps für Canon EOS RP und Canon EOS 90 D als freies Firmware-Download verfügbar
Canon 100-400 an C300 (war: Canon C300 PL auf EF umbauen?)
Neue Canon Objektive: RF 15-35mm F2.8L IS USM, RF 24-70mm F2.8L IS USM und besserer Augen-AF für Canon EOS R und RP
Canon HV 20
Canon XL 1
Canon EOS R5
Canon FD zu EF - Umbau
Canon MVX250i
Canon Powershot G2
Canon EOS R
CANON C70
Canon FD - Blendenproblem
Canon R3 Ankündigung
Canon Ixus 40
Canon Eos C5?
Canon S2 IS Erfahrungen
Canon GX10 Schärfe Look
Canon EOS R3 Vorstellung (14.09.21)
Canon Legria GX10
Canon XA 30 störende Laufgeräusche

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
KI
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos