Frage von ralf superior:
Hello,
Search by now have found no answer, so I try something with a new question:
If I use my video camera directly connected s.das TV, everything looks good. After the capture, but the film is grainy, a bit überlichtet, with not so bright and even partially distorted colors. The looks on the burned DVD exactly like this. 've Tried with several programs: including Szenalyser with live, WinDV, the result is all the same. Synonymous Have all possible settings in the programs sampled. Has anyone any idea why this may be?
Antwort von Digitalimager:
Hi ..
I would say that you maybe your TV capture card to replace solltest.
If possible you should s.deiner TV Chincheingang the card and not use the antenna input.
When an antenna input, the signal is totally alienated because possibly not the right channel (36) was found or does not match the fine-tuning.
Also should you have a high quality antenna or Chinchkabel use, the distance between camcorders and TV card should be as short as possible.
Software for capturing, there are very many, but you can but the freeware DScaler 4.x recommended.
I prefer me also with this software on my VHS tapes SkyStar2 to the plate, on the antenna input because my VCR has no RCA.
The quality is almost DVD.
Good luck.
Greeting
Ralf
Antwort von ralf superior:
Thanks for the reply, but I was probably wrong words (isch 'abe no TV Karto)
So:
Camera s.TV connected: everything ok.
Camera s.PC and capture: a problem.
The whole is synonymous only been a few weeks before everything went fine.
Still ne idea?
Antwort von Digitalimager:
Ok I versuchs again ... ;)
It looks to me all the way to the interference from ...
What is the Camera s.PC connected?
Chinch - Which capture card
USB?
FireWire?
Okay cable yet or has secretly to the Hamsters rumgenagt?
What capture software is used.
Is the right-channel recording in the software, the correct format (PAL)
If a new video software before the error / problem to install? It could be the driver or codec has been replaced.
You see, it is not simply a remote diagnosis.
Let's try it just until it funzt.
Bye
Antwort von PowerMac:
Blub:
http://forum.slashcam.de/viewtopic.php?p=117788 # 117788
Antwort von ralf superior:
OK, so we make it:
What is the Camera s.PC connected?
FIREWIRE Cable still OK?
YES What capture software is used.
WIN IT OR SZENALYZER Is the right-channel recording in the software set
BOTH Try the correct format (PAL) YES
If a new video software before the error / problem to install?
NO, ONLY AFTER I HAVE TRIED EVERYTHING POSSIBLE WinDV are synonymous-no dropped frames (called so, ne?)
It is synonymous nix in the background.
It is simply that the sky is not blue but is gray and all the colors are pale. Everything is a bit blurred and pixilated. And look not only s.Monitor so, but just as synonymous of the burned DVD.
Antwort von Markus:
Everything is a bit blurred and pixilated. And look not only s.Monitor so, but just as synonymous of the burned DVD. On the PC monitor or (synonymous) s.Television? In the latter case I would be interested in times, you run the movie on DVD and burn to DVD what type it is.
