Logo Logo
/// 
mal wieder AVCHD import

again AVCHD import



Frage von stefangs:
Juli 2009

bein new here - please do not shoot the same! I have a panasonic HDC SD300 and read here that you can invite the log & transfer files over easy. 16g sdhc card on my minutes are just 13 files with a total duration of probably under 3. I waited only 6 minutes, until the first thumbnail and then released Final Cut Pro crashed.

I have previously tried schonmal, and then it worked fine, but took forever synonymous. s.easy setup can be found where I always rumschraube, but I found no suitable? Otherwise, nothing has changed.

sorry if the question is silly, but my professionalities unfortunately audio.



Antwort von Rolf Hankel:

"stefang" wrote:
bein new here - please do not shoot the same! I have a panasonic HDC SD300 and read here that you can invite the log & transfer files over easy. 16g sdhc card on my minutes are just 13 files with a total duration of probably under 3. I waited only 6 minutes, until the first thumbnail and then released Final Cut Pro crashed.

I have previously tried schonmal, and then it worked fine, but took forever synonymous. s.easy setup can be found where I always rumschraube, but I found no suitable? Otherwise, nothing has changed.

sorry if the question is silly, but my professionalities unfortunately audio.


Hi Stefan
So I do that with the clips of my 100 so Hf: Insert reading copy with a SDHC card reader, on an external hard drive, then delete the bad clips of the external and external to a second (copied, for safety's sake) That works fine with me everything; preview using VLC player, provided, however, is a potent PC.
The further processing is done then with EDIUS 5.1.
Why is not smoothly works with you is perhaps s.der configure, your box.
Gruss Rolf ...



Antwort von RickyMartini:

What's he doing Edius Edius 5.1 to 5.0.1 so everything better?
Can it play AVCHD reasonably fast on the timeline?

In NEO2 this is unfortunately not yet possible - this degenerates into a pure slideshow.








Antwort von stefangs:

"Rolf Hankel" wrote:

So I do that with the clips of my 100 so Hf: Insert reading copy with a SDHC card reader, on an external hard drive, then delete the bad clips of the external and external to a second (copied, for safety's sake) That works fine with me everything; preview using VLC player, provided, however, is a potent PC.
The further processing is done then with EDIUS 5.1.
Why is not smoothly works with you is perhaps s.der configure, your box.
Gruss Rolf ...


hi rolf,
Thanks for the tips, but since I do not s.pc but s.mac work, help me, unfortunately, the next nciht. I have read in other forums that perian is to blame, but I have not before and so I'm still veeery far s.anfang. maybe someone has a hint how I can get the data into my Final Cut Pro? It is probably synonymous imovie over, but the logic of buying an expensive tool to take it, and then about the conversion to make imovie, I do not see.



Antwort von WoWu:

@ Stefang

Final Cut Pro is not AVC-capable. Import can take place only with simultaneous transformation into ProRess422.
Apple always bulges at least a year longer have to run current format.
It is not synonymous thus accountable to that FCP2 still can be ... likely it is that it can FCP3) under OS 10.6 (and perhaps the end of the year.
If you want Data Archive, the AVC, currently remains only iMovie9. You can edit it natively but not synonymous to synonymous only one intermediate codec. But at least they can be in the original codec has time to archive .... how Apple has always said something special .. expensive and behind the times. .... But at least chic.



Antwort von stefangs:

"WoWu" wrote:
@ Stefang

Final Cut Pro is not AVC-capable. Import can take place only with simultaneous transformation into ProRess422.
Apple always bulges at least a year longer have to run current format.
It is not synonymous thus accountable to that FCP2 still can be ... likely it is that it can FCP3) under OS 10.6 (and perhaps the end of the year.
If you want Data Archive, the AVC, currently remains only iMovie9. You can edit it natively but not synonymous to synonymous only one intermediate codec. But at least they can be in the original codec has time to archive .... how Apple has always said something special .. expensive and behind the times. .... But at least chic.


yes, I know that unfortunately is not a native - but I know that many people, the problem with the crash when importing transcode / have, while in others it works without problems. I was hoping that someone here is already successful and has a tip - as I said, s.perian it is not, because that to me is not on it.



Antwort von hannes:

> If NEO2 is unfortunately not yet possible - that degenerates into a pure slideshow.

In the BIN to convert to Canopus HQ.
Then jerky as synonymous nothing more.



Antwort von Rolf Hankel:

"hannes" wrote:
> If NEO2 is unfortunately not yet possible - that degenerates into a pure slideshow.

In the BIN to convert to Canopus HQ.
Then jerky as synonymous nothing more.


Hello

Not transform in the Bin (; is long and needs a lot space), but outside of Edius by dragging and dropping.

Gruss Rolf ...



Antwort von stefangs:

So, with much patience, spit, and strong nervenkostuem other forums I have come to the spoon. obviously it does not work under 10.5.4. higher I did not want to upgrade, because then other important programs no longer go so far as I know not whether it is synonymous with 10.5.5 or higher. I am now certainly go back to tiger 10.4.11. leopard looks out for me but somehow beautiful, but tiger is faster and feels solid s.fuer me and above all:

Final Cut Pro can now see without problems avchd files of the memory card and the preview is synonymous in regulation. I am writing this on again, because I have almost spent a week in order and perhaps synonymous nor anyone else any good. important is that all updates up to 6.0.6 and run more than once synonymous software update, otherwise goes nothing!



Antwort von weitwinkel:

maybe it is synonymous with a blackmagic intensity and
capture in prores422 ...
gruß cj



Antwort von MikeMan:

Hi,

I have the Academic version of Final Cut 6.0.4
- And the import of (; avchd). Mts files (; directly of the action and of record) will not be easy. What shall I do? Transcoding with Voltaic is indeed not really as THE solution ...
And the update of Final Cut Pro to 6.0.6. requires an Apple ID, which I do not want to create. Apart from the import would funz yes s.6.0.2, or am I mistaken?

muchisimas gracias, hasta pronto,


MikeMan
****************************



Antwort von stefangs:

"MikeMan" wrote:
Hi,

I have the Academic version of Final Cut 6.0.4
- And the import of (; avchd). Mts files (; directly of the action and of record) will not be easy. What shall I do? Transcoding with Voltaic is indeed not really as THE solution ...
And the update of Final Cut Pro to 6.0.6. requires an Apple ID, which I do not want to create. Apart from the import would funz yes s.6.0.2, or am I mistaken?

muchisimas gracias, hasta pronto,


MikeMan
****************************

well, as I said above, it is only with me with all the updates to Tiger, that is 6.0.6 under 10.4.11. what is the problem with apple id? maybe it will work under leopard, but did not with 10.5.4, because by then I was already and next because of other software upgrade, so I went back to tiger.









Antworten zu ähnlichen Fragen:
AVCHD import ofCanonAX 10
import of AVCHD (; m2ts) of sony CX505VE in Final Cut Express 4 is not funzt
Final Cut Pro import AVCHD files
Import AVCHD into Final Cut Express 4 does not work!
Some questions about Final Cut and import of HF200 AVCHD
AVCHD Import toast with 10 or FCE?
again AVCHD import
AVCHD 50i with import into FinalCut
Import AVCHD into Final Cut Express leads to Bewegungsunschärfen
AVCHD Import and Export in FCE
Import AVCHD into Final Cut Pro
How AVCHD files (HF100) in PSE7 import
AVCHD Streaming
PC für AVCHD?
AVCHD schneiden
AVCHD mit Pinnacle Studio 11?
Medienorganistion AVCHD und FCPX
lange AVCHD Videos in Premiere Pro organisieren
G81, keine EXIF-Daten in avchd Videofiles?
Premiere Pro Hardwareanforderung für Multicamschnitt HD AVCHD
Probleme mit AVCHD-Interlaced und FCPX
AVCHD-Videos schneiden. Welches Muxer-Ausgabeformat?
AVCHD Videos (von Panasonic Camcorder) wie umwandeln in mpg.files ?
Bildstreifen horizontal und vertikal SONY AVCHD-Handycam (Sony HDR-XR550)
VHS PC Import
China Import seriös?

















weitere Themen:
Spezialthemen


16:9
AI
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
KI
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos