Frage von mleko:
hi
knows someone at
the time of its 5d MII?
Antwort von B.DeKid:
Exchange! - So yes NEN error is clearly not at times, looks like a dead pixel.
Direct exchange, I recommend that because of 2500 euros will be what you do not have!
MfG
B. DeKid
Antwort von ed-media:
Should it recognize the camera at a reset.
In any event, at a JVC roadshow with the HM700, I first of all present a dead pixel in the viewfinders found synonymous only if the Vertriebler thought it was a dust grain, after it was synonymous in the Viewfinder, he called his phone with his colleagues in order Friedberg Council.
Then he presented the recording to a reset to the dead-pixel to identify and then back again, then again everything was OK.
But something should be synonymous with the Canon be possible, because defective pixels are removed, will be exchanged as often nothing more nowadays.
I was a few years time the whole optical block with all CCDs exchanged, at a GY-DV500, after which the camera has fallen off the table, I went to a GY-DV5000 has come.
Antwort von mleko:
Should it recognize the camera at a reset.
Then he presented the recording to a reset to the dead-pixel to identify and then back again, then again everything was OK.
But something should be synonymous with the Canon be possible, because defective pixels are removed, will be exchanged as often nothing more nowadays.
like now? I have reset - but this still see a white pixel.
Antwort von deti:
At Canon it is definitely not so that you own the dead pixels can be corrected. This is the device to indicate a service - the camera still less than 14 days old, so they could be the dealer synonymous with a new exchange.
Only for the elimination of dust, there is a function that the user can execute (; Dust Delete Data Detection). Here, however, the image defects detected on a white surface is not masked, but only in the metadata of the image indicated. The removal must be later in the imaging software to happen. That helps but unfortunately not in the recording of videos.
Deti
Antwort von handiro:
clear warranty / guarantee if there is any discussion forums superfluous.
Antwort von mleko:
ok. tnx for the tips
Antwort von mleko:
SO!
I have now my brand new cam get ... and lo and behold - the white pixel is gone ... that I now get a blue ...
how beautiful ...
what it looks with 3200% in photoshop from:
nice slow nervt das!
the ultimate test for 5d MII owner:
1. objectively down - and on the cam covers.
2. activate video mode and 10sec in 6400iso times filming.
3. on the pc / mac in original size anschaun
4. who seek shall find!
I'll call tomorrow canon at times!
Antwort von Markus_Krippner:
Sensor putt. Warranty. Exchange it!
On the issue of dead pixels rausrechnen: I know which of its Digibeta mill of a friend. The synonymous suddenly had some dead pixels in the middle of the picture.
Apparently there are Digibeta mill operation that dead pixel auto detected, and in a memory. In the case of my friend was just then that memory is full.
One has then NEN dirty trick used in its specialist workshop was just a bigger memory for the dead pixels built. Was sauteuer (warranty was scho rum), but still cheaper than a new sensor.
markus ... :-)
Antwort von WideScreen:
Only the Digibetamühle was not new. In his old sensor I understand that as yet, but with a new camera should not have. And even ned 2x. And three times already so its no wonder the camera. :-p
Antwort von mleko:
that's when 5dmII but "normal" times google for "hot pixel 5d video mode" and you'll be amazed!
stupid is that rausrechnen of dead / hot pixel only works with photos, and not for videos!
Antwort von Schoko:
Bring the pixel 5D2 errors in the Canon Service. The error can be achieved by adjusting the camera wegrechnen. When I went inside of two hours, error is corrected:
http://www.videotreffpunkt.com/thread.php?postid=144928#post144928
Antwort von mleko:
echt? I thought that with the rausrechnen of dead / hot pixels, etc. is only for photos? I had my first service and at the defective pixel is only from the photos disappeared .. in the video, he was still ..
I then phoned with canon, but naturally had no idea. Of course not.
So: is for you! definitely! miscalculation of the videos out?
I did that my 3! 5dmII and had returned to the same sch ....
but please take a few seconds with iso 6400 on, only to see whether he is gone?
Antwort von Schoko:
but please take a few seconds with iso 6400 on, only to see whether he is gone? büddeschön: (; Recording without Lens, only cover on the housing, iso 6400)
I see as nothing more. I was skeptical at first synonymous, but it seems to have worked well - as I said, the picture is straight from a video, (and no photo).
Antwort von mleko:
cool.
I got myself about 10 times with specialists in canon connect .. and it gave me no one can help!
you have a contact email or telephone numbers or similar?
Antwort von Schoko:
I am:
CCI Service Center Willich
Canon Deutschland GmbH
CCI Service Center Willich
Siemens Ring 90-92
47877 Willich
Tel: 0180 / 500 60 22 (0.14 e / min.; DTAG fixed)
Fax: 02154 / 49 56 99
hingefahren and had the camera in person.
(Invoice / receipt with you warranty)
As I said, within two hours of the thing was done.
Antwort von mleko:
and what exactly have they done .. where is the synonymous?
because I was at the repair shop of canon, and which have the pixel is from the photos but not videos from rausgebracht.
Antwort von klusterdegenerierung:
Hot pixels are not dead pixels. Hot pixel can rausrechnen, not dead. RED Deadpixel and are always in "all" Visibility settings.
My first had 3 Deadpixel, she promptly went back and there was a new one. Hots With Canon you can fix after your return.
Hotpixel not always appear in all settings. One sees well-synonymous differences between the two, because the dead body and burnt out as hot only when needed Blind.Theoretisch Canon Hots not in any way. As with the TFTs, may be synonymous because a certain% failure rate.
And be careful, you have a first Dead, will make it more easily.
Greeting
Antwort von mleko:
And be careful, you have a first Dead, will make it more easily.
Greeting why are the more easily?
Antwort von klusterdegenerierung:
For me it was so, until then I had a 2, then 3! I was then to Blöd! I can therefore say that the last two were in close proximity. In the beginning was the surroundings of the 1st Clean and then, as I said. Why can I not synonymous, but I can be the basis of my pics or on hold.
Greeting
