Frage von filmfreak:
Since the two projects, I have a weird problem: After about 30 minutes easily capture (firewire) will plötztlich strong on dropouts.
Disregarding the camcorder a bit cool (30 minutes), everything is ok again.
Is no big problem if one's white. Weird is that this problem never occurred previously. (Same camera, same band type, the same PC).
Has anyone ever had a similar problem?
Greeting
filmreak
Antwort von WoWu:
Selber camcorder? Then the column head is probably a slightly wider. And now for heat tolerance from the run.
Antwort von O`Shannon:
Well yes, but the camcorder has a maximum of 30 hours on the head hump.
My old Canon MV200 has certainly managed 300 ...
Antwort von Markus:
Does the problem always with the same tape on the tape or has no influence over?
If the camera moves or Firewire connection during the cooling phase separated?
Antwort von filmfreak:
I'm sorry that I can reply only now.
The problem occurs now 2 times (different cartridges, I use all 1mal), the camcorder was not separated during cooling and not much moving.
Antwort von Markus:
In this case I would camcorder times s.einem the other PC for free. Then we can say whether it s.Deinem PC or s.Camcorders lies.
