Frage von Stu:
servus
at Pinnacle I get with my TV card is currently only Kabel 1, RTL and VOX properly clean but the rest is not at the station or it's poor reception. All I can for the country / region is not the 49 since adding there is always a 1
oh s.was not know it could be? Times are all right in there, video default value is NTSC_M!?
Who can help?
mfg
Stu
Antwort von Peter S.:
The video standard value must be placed on course, Pal. Is there anywhere a possibility to enter the country as Germany? Otherwise, the software looks at Kanölen that are occupied not with us ...
MFG Peter
Antwort von Stu:
Thought you did dat got here PAL_M PAL_N And what of it?
naja may, at the country / region to enter the country code (49?), but for me there is ne 1 and it is all there again and can not be changed
schonmal many thanks for your quick reply;)
mfg
Antwort von Nightfly!:
I would PAL_N with (as a PAL substd)
try.
Greeting Nightfly
Antwort von Markus:
Hi Stu,
in Germany is PAL-B and-G common. PAL describes the color coding of the subsequent point, the picture-and sound parameters (number of lines, frame rate, etc.). The sub-groups B and G are slightly different in the channel bandwidth, the other parameters are identical.
NTSC-M is widely usin North America and Japan. PAL-M is in Brazil and partly in Thailand are used. The color coding of PAL-M PAL (logical!), The other picture-and sound parameters correspond to those labeled M.
PAL-N is found in Bolivia and Paraguay. If your TV card does not allow any other setting, PAL-N would still deliver the best results. However different the Picture-/Tonträgerabstand to "our" PAL, which should mean that you will receive no sound.
More on NTSC-M (who are interested) ;-)
Japan vs. NTSC. NTSC-US
Antwort von Stu:
404ERR
