had massive problems with the sound on the PC playing DV material. In English the sound is totally broken. Many states have Tonausetzer.
If I use the material to hear the Camera (synonymous with Headphones) but it is crystal clear and that is somehow at sauber.Muss capturing happen.
Has anyone an idea what might be the cause?
Use a XM2 and Premiere 6.5 (and to caputuren edit)
Antwort von Schleichmichel:
Perhaps the true sampling rate is not. This manifests itself not so, but it can lie on it. Premiere not Know ....
Antwort von Dr. Walter Gesierich:
However, the isses. Adobe Premiere 6.5, there is much more sensitive, like other editing programs. The correct sampling frequency for audio is absolutely crucial for a good Tonergebnis. 1. All of our cameras to work with 48 kHz (48000 Hz) with sampling frequency of the sound recording. (Music-CD's with 44.1 kHz). In the following situations you have the correct setting of the sampling frequency as: 1.1. You walk up (Camera is connected via firewire and is switched on), the large windows "load project settings". I suppose now, that you no additional video card to use your calculator, so you have the folder either DV-PAL in the open and then the Settings sub-box "standard 48 kHz" is selected, or if your calculator is fast enough the folder "DV-PAL Realtime Preview" to open, and also the 48 kHz version to choose. 1.2. If the program is finished loading you have a post: upper Menuzeile> Project> Project Settings> (not "general" but after aufklappen> Audio> 48000 Hz 1.3. If you prepare now, the recording with File> Capture> Movie Recording you can host at the open window to safety right again on the tab "Settings" button, there should now synonymous with the frame size and frame rate the kHz setting is the host.
To set Premiere 6.5 can work properly and no longer needs to quickly (in real time!) The sound in the sampling frequency transform, which creates Premiere and your calculator are not synonymous. Therefore synonymous another tip: If you are into this project (with 48 kHz default) importierst Music, for example of a CD, of course, with 44.1 kHz sampled, there's already trouble. If your calculator ever created, 2 lying on top of each other soundtracks with different sample frequencies to mix, then there is in any case tiresome extra sounds, live currency arise. So absolutely every sound that is still in the project should come before external necessarily with another program to 48 kHz sampling frequency bring. This applies of course for MP3 music files. Popular at our club is the great variation of Nero burning software, there is then the Nero Wave Editor in the process of counts around what is coming. So unless a lot of fun and good sound
Antwort von beiti:
had massive problems with the sound on the PC playing DV material. In English the sound is totally broken. Is Tonausetzer have many.
To isolate the problem, you should first determine whether there was a problem within Premiere Play, or whether the sound is so chopped up as part of the AVI file on your hard drive is located. If you for example, a piece sound as WAV exportierst and in another program anhörst, he is still hacked, or is it all?
"Dr. Walter Gesierich" wrote:
To set Premiere 6.5 can work properly and no longer needs to quickly (in real time!) The sound in the sampling frequency transform, which creates Premiere and your calculator are not synonymous. [...] So absolutely every sound that is still in the project should come before external necessarily with another program to 48 kHz sampling frequency bring.
Premiere 6 can be very clean, the sampling rate conversion, and on today's computers synonymous problems in real time. So for the insertion of CD-music, etc. is not necessarily the previous conversion is necessary. However, the quality of this first correctly, and does it under Project> Project Settings> Audio. There is the "Conversion Rate Increase" default "Off", resulting in a little while computationally intensive, but very poor conversion results. If you here instead of "Very good", the conversion results are just as synonymous. The bad default setting of the program is probably by the age of the software to explain. At that time, had many calculator in fact still have problems, a high-quality conversion in real time to make.
Antwort von degi73:
Thank you for your detailed info ....
But unfortunately it is not fact, because of our productions, I always build according to this .....
The Calculator (Maxdata) should be with 2 x 3 GHZ and 1 GB of RAM really fast enough. I use the calculator for 5 years in our post-production studio and the sound was always crystal clear.
I post the daily times NEN Audiofile where dropouts are heard.
Antwort von beiti:
I use the calculator for 5 years in our post-production studio and the sound was always crystal clear.
Does this mean that the sound was so far always in order, and you have only recently this problem? Did you s.Workflow something changed?