I made a bike film with music! I would now starting next to the sound synonymous to the ambient noise. Music and ton are on two tracks. The music does not make any problems but the tone krazt in the box. (but only after I have rendered the film) in the preview everything is still ok! would be grateful for help theslicer mfg
Antwort von Jörg:
Hi, normalize the audio track, aka look after the mixer, whether to adjust the track overdriven, over control. Gruß Jörg
Antwort von theslicer:
what do you normalize with? habs scho in the audio mixer screwed it down, unfortunately, still scratching! but only after it has been exported as avi
Antwort von Jörg:
normalize -> right click on the audio track -> Audio Gain -> . normalizing If the audio to be mp3, it convertible to a wav. Gruß Jörg
Antwort von Wiro:
And then pull far down before exporting the Audio Mixer window, the master controller so that the loudest places around-6dB refuse. Greeting Wiro
Antwort von Markus:
More on the level control:
Antwort von Wiro:
Well, Your linked article is a bissel dangerous, Markus. It is about analog audio control, and this is where the dog is buried. Analog signals have a more or less pronounced headroom (I mean the other side of 0 dB), digital signals so do not know something - the clipping is a very abrupt.
So it is good to create the headroom "artificially" by simply remain a couple of dB below zero. The EBU standard so as to see the "magic" -9 dB, will be contested over the ever so much. Experience shows that it is on then Appro to use that one Masteraussteuerung of -9 dB (peaks to -6 dB) later exactly on the Television revealed the level, synonymous to the public broadcasters. One has only to keep it, then it fits even ;-))) Greeting Wiro
Antwort von Markus:
Wiro Well, since I assumed, perhaps too much. Although the link is in first place at the analog level control, but if in the overview of issues related to the next point (
