BenQ SW320: 4K 32 "Professional Monitor with HDR

BenQ's latest UltraHD 4K (3840 x 2160) Monitor SW320 targets with features such as hardware calibration and High Dynamic Range (HDR) at the professional use. The 31.5 "(approximately 80cm) wide 10 bit IPS panel of BenQ SW320 covers the extended Adobe RGB color space to 99%, the sRGB and Rec.709 from 100% and DCI-P3 to 87%. However, what exactly the certified Technicolor HDR brings support, is not entirely clear - the brightness of 350 cd / m and the contrast ratio of 1,000: 1 match in any case the normal SDR monitors pallet Master element Calibration software can be used together with a color calibrator to calibrate the SW320. . the internal 14-bit 3D look-Up-Table (LUT) is thereby used by the built-in tools for color calibration for more rigorous calibration PIC 1:. BenQ SW320 PerColor temperature sensor for the ambient light to automatically adjust the color of the monitor by Color Display Clone software to the respective conditions. Hotkeys Puck, a wired remote control OSD can be switched between different Farbraeumen. but using the pucks can also other, adjustable by user parameters such as brightness or contrast, are simply called or changed. The GamutDuo function allows images from one or two different sources simultaneously sift in two different Farbraeumen (PiP / PBP). The SW320 is possible to continuously adjusted to 150 mm in height and tilt from -5 to 20 degrees forward or back. The viewing angle is up to 178 horizontally and vertically. At interfaces are DisplayPort 1.4, Mini DisplayPort Bild zur Newsmeldung:  more infos at bei www.benq.com deutsche Version dieser Seite: BenQ SW320: 4K 32" Profi-Monitor mit HDR