[13:57 Sun,7.November 2021 by Thomas Richter] |
Panasonic has announced firmware updates for its MFT cameras
![]() Panasonic GH5S Furthermore, ProRes RAW output to supported Atomos recorders is of course possible with the MFT models. Which RAW dialect is suitable for your own workflow is ultimately decided by the editing, grading or compositing system used. The output for both RAW dialects is always in 12 bit. At 59.94Hz system frequency, three possible frame rates are available in 4K 4096 x 2160 (17:9) or in Anamorphic 3.7K 3680 x 2760 (4:3): 59.94p, 29.97p, 23.98p. At identical resolutions, 50.00p and 25.00p are possible at 50 Hz system frequency. Exact 24.00p is obviously not implemented. Since the BGH1 does not have its own display or viewfinder, an additional function was implemented in the new firmware: Because you would otherwise have to connect another monitor for camera operation, you can alternatively switch the RAW output on and off by an external key combination. This way, the used RAW recorder can still be used to operate the BGH1. In addition, manual fine adjustment of the focus rings on the lens becomes possible with the new firmware. In addition to linear and nonlinear behavior, the path of the focus control can now be set individually from 90 to 1080 degrees. This will be enabled not only on the GH5S and BGH1, but also on the G9 with new firmware. ![]() Panasonic BGH1 As of now, the new firmware versions ![]() ![]() What&s new with the firmware updates for Panasonic GH5S and BGH1.1. added functions -The[focus ring control] function has been added. Compatible lenses: H-XA025, H-ES200, H-E08018, H-X1025, H-HSA12035, H-ES12060, H-FS12060, H-X2550, H-HSA35100, H-FSA45200, H-ES50200, H-FSA100300 and H-RS100400. GH5S Firmware Version 2.2 1. RAW video data can be output via HDMI to Blackmagic RAW on Blackmagic Video Assist 12G HDR. Micro Four Thirds: 4K (4096x2160) / 23.98p/25.00p/29.97p/50p/59.94p / 17:9 / HDMI: 12-bit Micro Four Thirds Anamorphic: / 3.7K (3680X2760) 23.98p/25.00p/29.97p/50p/59.94p / 4:3 / HDMI: 12-bit V-Log L or Rec.709 is selectable on the Live View monitor during RAW output. Shooting assist functions such as V-Log L View Assist, WFM (Wave Form Monitor), Vector Scope, and Zebra Pattern can be used during RAW output. *The selectable capture mode depends on the firmware version of Blackmagic Video Assist 12G HDR. *For information on the appropriate Blackmagic Video Assist 12G HDR firmware version, visit the Blackmagic Design website. *DaVinci Resolve or DaVinci Resolve Studio is required to playback and edit Blackmagic RAW data. DaVinci Resolve Studio is required to deliver projects with Blackmagic RAW data in resolutions above 3840x2160. *Depending on the situation, not all features may be available. 2. new functions -The[Focus Ring Control] function has been added. Compatible lenses: H-XA025, H-ES200, H-E08018, H-X1025, H-HSA12035, H-ES12060, H-FS12060, H-X2550, H-HSA35100, H-FSA45200, H-ES50200, H-FSA100300 and H-RS100400. It is possible to assign the[HDMI RAW data output] function to the Fn button, and the user can turn it on or off directly on the camera (BGH1). 3. BGH1 only: LUMIX Tether for Multicam software version 1.3. -[Photo Style] filters can be used for still image capture. The zoom function of LUMIX G power zoom lenses can be controlled. ![]() Blackmagic Video Assist 12G HDR Our tests on the Panasonic GH5S, BGH1 and the Blackmagic Video Assist 12G HDR.- ![]() - ![]() - ![]() - ![]() - ![]() ![]() deutsche Version dieser Seite: Firmware-Update bringt Blackmagic RAW Ausgabe für Panasonic GH5S und BGH1 |
|
![]() |