[16:38 Tue,6.May 2025 by blip] |
At NAB, Portkeys showcased the lightweight and affordable PT5 III 5.4" field monitor, which is now said to be available for . Compared to the PT5 II, there are some changes: For example, the built-in panel is now slightly brighter (max. 800 instead of 500 nits), but it only supports 8-bit instead of 10-bit as before. The contrast ratio is specified as 1000:1, and the resolution is 1920 x 1152 pixels. Input signals up to 4K DCI are accepted at 30p, and 1080p60 can be output. ;) Portkeys PT5 III
The monitor weighs only 154.5 g with compact dimensions of 135.1 x 82.5 x 22 mm. The viewing angle remains the same at 178°. The MOVNORM OS operating system offers a long list of quite professional monitoring functions such as the use of 3D LUTs, anamorphic de-squeeze, false color, RGB/Luma waveform, zebra, peaking, etc. ;) Image Capture and Image Overlay are also supported. This allows reference frames to be saved in order to reproduce the image framing more easily during a later recording. With an integrated 360° color grader, the hue and saturation of a selected image section or a specific color range can be adjusted. Power is supplied via a Sony NP-F battery or via USB-C. The Portkeys PT5 III has two 1/4"-20 mounting points on the bottom and right side of the monitor. A microphone input (mini-jack) and a headphone output are also on board.  more infos at bei www.portkeys.comdeutsche Version dieser Seite: Neuer Portkeys PT5 III Kameramonitor wiegt ca. 150g und ist etwas heller als zuvor |
 |
|
|