[14:27 Mon,1.April 2024 by Thomas Richter] | ||||||||||||||||||||||||||
Canon has released new firmwares for its full-frame mirrorless cameras R3 (firmware version 1.7.1) and R5 (firmware version 2.0.0), which improve lens support and memory capacity as well as fixing several annoying issues. More specifically, both cameras allow remote control of the servo zoom via EOS Utility or Camera Connect when the Power Zoom Adapter PZ-E2/PZ-E2B is attached to a compatible lens and the use of CF storage media larger than 2TB. ;) Canon R3
Firmware Version 1.7.1 incorporates the following enhancements and fixes: 1. Enables servo zooming to be remotely controlled from EOS Utility or Camera Connect when Power Zoom Adapter PZ-E2/PZ-E2B is attached to a compatible lens. 2. Enables up to 2 TB to be used on CFexpress cards larger than 2 TB. 3. Fixes an issue that may cause the camera, in rare instances, to stop functioning when using GPS. 4. Fixes an issue that may display Error Code 70 when performing anti-flicker shooting at a shutter speed of 1 second or higher. 5. Enhances security for FTPS (File Transfer Protocol Security) connections. 6. Fixes an issue in which Mobile File Transfer may not function when connecting the camera to an iPhone compatible with USB 3.0 and higher. 7. Fixes an issue that, under specific circumstances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed. 8. Fixes minor issues. Firmware Version 2.0.0 incorporates the following enhancements and fixes: 1. Enables servo zooming to be remotely controlled from EOS Utility or Camera Connect when Power Zoom Adapter PZ-E2/PZ-E2B is attached to a compatible lens. 2. Enables up to 2 TB to be used on CFexpress cards larger than 2 TB. 3. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off. 4. Fixes an issue that, under specific circumstances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed. 5. Fixes minor issues. Here are our tests of the two cameras: -  Canon EOS R3 in practical test: 12 bit 6K RAW 50p, skin tones, LOG/LUT, stabilization, DJI RS2 - Canon EOS R5 C in practical test - the best photo-video DSLM? 8K 50p RAW, skin tones, LOG/LUT Bild zur Newsmeldung:
 more infos at bei www.canon.dedeutsche Version dieser Seite: Neue Firmware für Canon EOS R5 und R3 |
;)
| |||||||||||||||||
 |
|
|