[15:47 Fri,27.September 2024 by Thomas Richter] |
Tascam&s new compact audio recorder FR-AV2 is specifically aimed at filmmakers, as it combines built-in timecode generation and synchronization with two professional XLR audio inputs, 32-bit float recording, and preparation for Bluetooth monitoring. This way, audio recording with the FR-AV2 can easily be synchronized with simultaneous video recordings from cameras or other devices without needing an external timecode generator. ;) Tascam FR-AV2
In addition to two XLR inputs, the Tascam FR-AV2 also offers a stereo mini-jack input for wireless and lavalier microphones, as well as a USB-C port, which allows the recorder to be integrated, for example, into an iPhone video setup. External microphones or other audio sources with a professional line level can be connected directly to the FR-AV2&s Ultra-HDDA preamps, which are characterized by a very low equivalent input noise of just -127 dBu, allowing audio signals to be recorded with maximum clarity and virtually no noise. One of the outstanding features of the FR-AV2 is the 32-bit float recording technology with a sampling rate of up to 192 kHz, which avoids distortion and allows for an extended dynamic range even with loud signal sources. The Tascam FR-AV2 uses a dual analog/digital converter and, thanks to its built-in timecode functions, is particularly suitable as a high-quality audio recorder for film shoots – it sends and receives timecode via its mini-jack ports and supports jam sync and the ability to synchronize timecode via Bluetooth (with the optional AK-BT2 adapter) and can also wirelessly synchronize with supported UltraSync-Blue devices from Atomos. The bright 2" display shows the recording settings and is readable even in bright daylight. Recording is done on SDXC cards up to 512 GB in size. During recording, features such as a built-in low-cut filter, compressor, limiter, and noise gate are available for optimization. ;) Tascam FR-AV2 With the optional Bluetooth adapter AK-BT2, the audio can also be monitored wirelessly during recordings. Three quality levels are available to obtain the best possible signal depending on the recording environment. Wired and Bluetooth monitoring work in parallel, so two people can always listen simultaneously. Via USB-C cable, the FR-AV2 can also be used together with iPhones for video and audio recording – this provides professional XLR inputs to the iPhone, and timecode can also be output to synchronize the recording with the smartphone. Via its USB-C port, the FR-AV2 can also be used as a USB audio interface with two inputs and outputs for iOS, Mac, or Windows-based devices. The Tascam FR-AV2 is available now at a price of around 425 euros, while the corresponding Bluetooth adapter AK-BT2 costs around 64 euros. ;) Tascam FR-AV2 Main Features of the Tascam FR-AV2- Professional two-channel audio recorder with dual A/D converters, sampling rates up to 192 kHz, resolution up to 32-bit float - Receives and sends timecode (LTC) for synchronization with a video camera, simplifies post-production (Tentacle-ready) - Wireless timecode synchronization with compatible products from Atomos - Bluetooth audio monitoring with optional Tascam AK-BT2 - With the help of the Tascam Recorder Connect app, up to five FR-AV2 and DR-10L Pro audio recorders can be controlled remotely - Two XLR/TRS combo inputs (24V or 48V phantom power) - User interface with 2" color display Additional Features- Ultra-low-noise Tascam Ultra-HDDA microphone preamps - High-precision clock generator (TCXO – temperature-compensated crystal oscillator) - Additional mini-jack input for audio from camera, wireless microphone receiver, or small microphones (2.5V or 5V power supply selectable) - Mini-jack output with adjustable level attenuation allows forwarding audio signals to cameras and other devices - Switchable low-cut filter, compressor, limiter, and noise gate for the inputs - Adjustable input delay to compensate for latency differences between microphones (0–300 ms) - Adjustable output delay to compensate for time delay between the camera&s video signal and the recorder&s audio signal (0–300 ms) - Markers can be set/recalled, clapper signals simplify later synchronization with a video signal - Metadata can be recorded (BEXT and iXML for WAV files) - Automatic closing of the recording file to prevent loss of already recorded data in case of disruptions - Headphone output via 3.5 mm stereo mini-jack - Built-in 2x2 USB audio interface, supports 32-bit float resolution - Long recording time with 3 AA batteries - Power supply also possible via USB-C port - Uses microSD/microSDHC/microSDXC cards as recording media (up to 512 gigabytes) - Compact, lightweight, and robust fiberglass housing for use with camera rigs  more infos at bei www.tascam.eudeutsche Version dieser Seite: Tascam FR-AV2 - 2-Kanal Audiorecorder mit 32-Bit Float und Timecode für Videoaufnahmen |
 |
|
|