Frage von Filmfan2007:
Hello,
I have a few weeks since the Canon HV20. It runs fine, but vertical movement (no preference whether up or down) is always a short once-quiet clicking sound, no preference whether they s.oder off. If it is off, you can hear the clicking sound obviously better, because the drive will not whirrs. If you click OK? Is that possible with optical Image Stabilization? Thank you!
Antwort von DeeZiD:
Well, have the same problem.
Seems s.der but - well, how should I say - slightly inferior processing must, because this Klacker synonymous occurs when the camera is off.
Gruß Dennis
Antwort von Andreas_Kiel:
Is that possible with optical Image Stabilization? Yes, very likely. In my FX1 klickert it off the camera, in an old Mavica with optical stabilization, as well as the clatter of you described.
Sony writes something in the instructions ( "No reason to panic, it is normal" or ...), so look in your booklet inside.
BG
Andreas
Antwort von darg:
If you Tapefach the open and the camera and her move out you will see a band leader who's off and her move out. Actually, the tape but when interleaved Camera And a report no longer move. The HV10 has the same, since I have both cameras. I thought it would be only what is broken or loose abgeschlateten but in the normal state seems to be. I do not know whether the role is synonymous loose when the camera goes into TapeSafeMode, so s.ist but the tape is in pause after a while.
Greeting
Axel, San Jose
Antwort von RupertGr8:
I shake the tapefach easily, so ca 1 mm the crack game synonymous wnens back in the right position slips
do you have that you send or makes nix?
gruß
alex
