Frage von holymoly:
when recording with a FireWire device I have no problems capturing the video signal to an analog but the recording of device (camcorder without firewire) does not work.
as is usual, I wanted to take the analog signal via a tv card ( "video in") and make it the way it readme under "recording without device control" is described. but that will not do.
synonymous but in fact it is logical that the nich goes for where prempro2.0 should know that he should try not to signal but to a firewire on an extra video card. But I can think of configuration options, as I can tell prempro2.0, of where to start, if not a firewire device is connected.
So it would be nice if someone can tell me how the "no recording device control" and really work properly, or how I can integrate into prmepro2.0 my tv card and configure.
HP works with another program, but I do not capture the video it was only then, then conversion to import it then in about Prempro (quality loss)
Antwort von Markus:
Hello,
the quality loss is not only arises when you convert after capturing, but probably already at the TV card. The latter usually only support MPEG-compressed video formats and some video files do not even meet the requirements for digital video (720 × 576 pixels, 25 fps interlaced).
How about with an A / D converter, which connects you via firewire s.Deinen computer? The premiere will immediately work together. ;-)
More Info:
FireWire FAQ">Camcorder / recorder s.PC connect, capture and edit images
Antwort von videotomi:
Thanks for the answer.
I s.eine synonymous digitization of pseudo-nen DV switch
or something expected. but only for
a single intake of
an age-old cam like this gets to buy what I then almost
never again would need?
And, according to manual it must go, yes, but I just dunno how.
already know (see manual), but this works so nich.
So who knows synonymous with working for an answering None of the extra
newly connected tv card? (then my plans are
capture a tv signal directly to prempro2.0 indeed synonymous gone)
I habs over-allocation of the system directly, but tries irq
no chance to make it clear that Prempro. I mean, yes, it is in
borrowing window to eliminate the possibility that control devices
But then there is the willingness mode still
"offline" and the window remains black. I miss the real
option "drivers for the video signal" as in other capture
programs is falling.
(synonymous nen regtistry entry to the source mounting in Prempro
hab ich nich found, or because I've missed something?)
So again - HELP!
Antwort von Markus:
... only for a single intake of
an age-old cam like this gets to buy what I then almost
never again would need? In this case, really not worth a purchase. Alternatives: You could be you as an A / D converter for rent weekly or give digitizing for a few dollars somewhere in order.
(my plans are then capture a tv signal directly to prempro2.0 indeed synonymous gone) Direct Capture in Premiere will not work very likely, because Premiere is a serious video editing software and possibly a garbled MPEG2 TV card is not an adequate source.
One possible approach might look like this: Using software VCR to record programs of the TV card, convert it to DV-AVI, then cut with Premiere. However, there are certainly more suitable for this application software as a premiere. - Maybe this one has a tip?
Antwort von prem:
ja na to capture not just yet another program and then with nem
import in Prempro. Although I think that there s little quality
lost, but that is just before a small inset video in the background
(with) resolution will be minimal and there is a crisp, clear signal
not so important.
One possible approach might look like this: Using software VCR to record programs of the TV card, convert it to DV-AVI, then cut with Premiere. Yes, I would do with the deluxe magix video studio there is no
problems on the tv card.
But now the time to ask - has anyone miss a capturing
without hinbekommen control equipment (as instructed in the help is)? be
have not simply written so pure there.
[premiere pro 2.0 help [f1]> G> Device Control> Recordings] without device control
would be nice if (you) to try it and could tell me whether
hinbekommst you like? So on the analog output, as all
Once upon a time ;-)
Antwort von holymoly:
times someone has already tried to make a recording device, the height control, is positively wobai this failed experiment? if not, I would ask that the time someone tries.
Antwort von Markus:
I have often gecapturet without device control, namely, whenever the setter is analogous. As an interface to the PC but I use a Matrox video card, no TV card.
Antwort von holymoly:
and the synonymous in Prempro - if so, how has the program for your video card recognized, or how they could enable it to integrate?
because it has synonymous with commercial ner tv card to work. this is the recording function without control devices so that I guess.
The drivers are so sure schlieslich synonymous s.der same places as the files system for firewire and other equipment.
(as I said, the capture of a different program (magix, avs) uch goes without problems, but since the tv card is detected immediately and the exact drivers appear not only in another premiere - and it's a pity)
Antwort von Markus:
No, I did not gecapturet with Premiere, but with the Matrox capture tool. The analog AV signal came via a Canopus ADVC-110 via firewire to the calculator, so the usual way in the video area.
Maybe someone else knows something to your question?
BTW: A video card is not a TV card. ;-)
Antwort von holymoly:
I've resigned myself ultimately synonymous that with my normal tv capture card in Prempro is nich so and have used so nu other programs - only the real is synonymous nich - Magix has its own format, which must first be converted again, so I can embed it on Prempro and when the avs are avi files (avi only possible) with 320x240 px and fps rate no preference (!!!) huge (20 almost 10 gb) minutes - accordingly synonymous takes adjustment.
nen capture any suggestion for a good program, with which analogue is possible and where possible create video files preserves the boldness in its purest form. grow (I'm thinking whether I should nen dv converter, but first I want to exploit the potential software solutions)
hey but for tips, like Prempro, the riff, I would still be interested.
Antwort von Markus:
Returns for your TV card DV-AVI? (Very unlikely). If not, you will not need any energy into finding any software to connect. Then it is in fact the hardware (TV card), which is not the desired data. Everything else would be synonymous again connected with conversion.
Is it because many video recordings? Otherwise, could you as a converter synonymous
