Logo Logo
/// 
HVX 200 Quicktimes im Final Cut Pro HD verzerrt + im QT-Player nicht da!!!!

HVX 200 Quicktime in Final Cut Pro HD + in the distorted QT player is not there!



Frage von solln:
November 2006

I have with the Panasonic HVX 200 and rotated the Quicktime with the P2 memory cards to my hard drive saved (720p resolution).

In the editing studio where I wanted to cut (which is synonymous to the present day had always worked, since they have all the codecs, etc.), can the quicktime now but did not open, neither the player nor quicktime in Final Cut Pro HD ( "lack of memory "They say this can not be). The strange is that Final Cut Pro HD on my iMAC to the Quicktime still distorted opened - there must be something on it (the MB synonymous voting rates, they ca.500 MB per clip), however, I get the files to my quicktime player 7.1.3 synonymous not to run.

The Final Cut with me as the clips are 960x720, 25fps, DVC PRO HD 720p60, 6.9 MB (s displayed - but it is distorted!

Example link:
http://img170.imageshack.us/img170/7851/beipiel2dv2.jpg

JPEG to comment: "This is the Final Cut Pro for me.
The gray bar appears to be normal, and with the codec itself can resolve. But the vertical displacement? "

Is my data scrap everything, I must turn again (would be the Super GAU), or is it s.Codec, on average, or at my studio or ...????

PLEASE help urgently, had soon decrease!

Thank you

Solln



Antwort von solln:

I have with the Panasonic HVX 200 and rotated the Quicktime with the P2 memory cards to my hard drive saved (720p resolution).

In the editing studio where I wanted to cut (which is synonymous to the present day had always worked, since they have all the codecs, etc.), can the quicktime now but did not open, neither the player nor quicktime in Final Cut Pro HD ( "lack of memory "They say this can not be). The strange is that Final Cut Pro HD on my iMAC to the Quicktime still distorted opened - there must be something on it (the MB synonymous voting rates, they ca.500 MB per clip), however, I get the files to my quicktime player 7.1.3 synonymous not to run.

The Final Cut with me as the clips are 960x720, 25fps, DVC PRO HD 720p60, 6.9 MB (s displayed - but it is distorted!

Is my data scrap everything, I must turn again (would be the Super GAU), or is it s.Codec, on average, or at my studio or ...????

PLEASE help urgently, had soon decrease!

Thank you

Solln



Antwort von Markus:

A little notice before it is even more:






Antwort von PowerMac:

Final Cut Which version exactly? You need 5.1.2. Nothing older.

The closely followed? http://www.aulich-adamski.de/en/perm/panasonic-ag-hvx200-720p50-p2-workflow-with-final-cut-pro

I do, you have either a wrong or old version of Final Cut, or pfuscht wrong in the settings around. Selects 720/25p than just simple configuration. Or at 720/50p follow instructions linked above.
The material is quite normal to look, any artifacts and gray bars are not normal and wrong.

When Rüberziehen of P2 contents and enable write-protect the entire card rüberziehen; s.Besten into a separate folder. But the above explains the instructions very well.



Antwort von MarrientesAD:

The final cut in the editing studio is up to date, as far as I know. There have been synonymous since until now always work.
The P2 cards are already deleted ... I have only my Quicktime.

Nochwas can save powermac?



Antwort von PowerMac:

If even the Quicktime on several machines do not work, no.
Makes me aback that 720/60p drinsteht. It should, however, 25 or 50. Then someone in the wrong P2 Ami-read format. Lad doch mal 2, 3 seconds of the original Quicktime file high. I look at it for me.



Antwort von Markus:

Quote:
The P2 cards are already deleted ... I have only my Quicktime.

This is with a reason why I only with DVCProHD tape recording would be interesting. The digital data at P2 suggests dying simply too fast.



Antwort von MarrientesAD:

Sorry, how can I upload?

Incidentally, I can now suddenly in the quicktime QT Player open, but they are just as distorted as described ...



Antwort von solln:

Smallest my quicktime has 58MB.

There are only five allowed ... how can I send you?

Many many thanks for the help ...

Solln



Antwort von PowerMac:

rapidshare.de



Antwort von solln:

"Unfortunately, all the hard disks of RapidShare.de currently full." is at least on their seie.

Alternative,

Thank you
ich werd narrisch



Antwort von solln:

In Manual of Aulich & Adamski, I have found the body. Below is an image still displayed exactly my distortion corresponds to:

However, with Final Cut Pro 5.1.2 is there
a complete new and additional 720p50 codec now and this codec is also used for
720p25. P2 Log 1.0.3 still needs the pass-through codec to access and 720p25
720p50, s.the software can not yet address the new 720p50 codec from Apple. Final
Cut Pro 5.1.2 on the other hand will not start up if the pass-through codec is installed
and crashes. The pass-through codec has to be removed to work with Final Cut Pro
5.1.2 but worse than that of all previously transferred with P2 Log 720p25 and 720p50
clips will have image errors now. The errors occur because image P2 used a log
modified 720p60 codec.! The new codec 720p50 is unknown for P2 Log 1.0.3 and
previously transferred clips.
For those who started yet some 720p25 or 720p50 projects with P2 Log there are
currently two possibilities:
1. Finish your projects with Final Cut Pro 5.1.1, P2 Log and the pass-through codec.
2. Re-import everything with Final Cut Pro 5.1.2 and do not use P2 Log and the pass-through
codec anymore.

Example photo
720p25 and 720p50 image errors with P2 Log 1.0.3.

Does this mean it is only because my Quicktime, which is as DVC PRO HD 720p60 are issued in another Final Cut with other settings, but still are worth what?

Or does it mean, my quicktime is nothing more valuable, because you must reimport them?



Antwort von PowerMac:

This can be if you guys still Cutter with P2 Log or incorrectly did. Lad was high and we can perhaps help. But not just false hope.



Antwort von solln:

I've uploaded:

http://www.mytempdir.com/1031984

And to "shower" button

I'm very excited!

Thank you



Antwort von PowerMac:

What's that for a file?



Antwort von SaraTaylorx1:

That with the codec has done, because it was not. Rather, the problem is that my quicktime of a map with which I played purely log p2 not be opened. now missing me a whole scene, which I must turn. except what a person falls:

the quicktime files are 500MB big part in the properties but they are 4 KB in size. They are not only ne link, because you really synonymous over 500 MB to play and occupy, if they are copied. in size but in contrast to the other nothing (not 1280x720 or similar) and when codec is not like other files with which I've played purely p2 and work, "DVCPRO HD 720)" but "time code, video "....

What's going on? `HELP? One after turning, I will not ....



Antwort von PowerMac:

All times in MPEG Streamclip open?



Antwort von deepcode:

schonmal with panasonic contacted?
After all, sell the very expensive money for this persuasive P2, which supposedly high quality standards should be.
Because something may actually happen in any case.

Type but to a driver problem.

times on other Mac's and P2 capable workstations tested?
Can the camera images to play?
Could you ext. the map s.der HVX need to play and the output signal digital / analog capture?



Antwort von Anfester:

"PowerMac" wrote:
All times in MPEG Streamclip open?


Yes, I will not!

Powermac: Can you repair my Quicktime? I've now uploaded somewhere else ... a working and a broken to the comparative. Urgent! If you manage to gibts thanks and cash ...

Thank you



Antwort von solln:

404ERR



Antwort von PowerMac:

Where did you load it?




Antworten zu ähnlichen Fragen:
Which Media Player can play 1080p50?
Verkaufe HVX 200
Cut with Final Cut Pro X: Second World War Epic Movie 'Unknown Soldier' Breaks Finland Box Office Record.
Final Cut Pro X 10.3.1
Workflow Final Cut Pro X
Fragen zu Final Cut Pro X
Cinema look, Final Cut pro X
Kurznews: Handbuch zu Final Cut Pro X 10.2
Gratis Final Cut Pro X Workshop
Final Cut Pro-X Untertitel Workflow
Problem mit Final Cut Pro X
Final Cut Pro X Clips verschwunden?
Alter Macbook Final Cut Pro
Final Cut Pro X-Freelancer gesucht!
Bremst Chrome Final Cut Pro X?
FYI: Trainings-Update Final Cut Pro X 10.3
Final Cut Pro X Crop mit Kinobalken
Deutsches Final Cut Pro X 10.2 Trainings-Bundle!
Catalina & Final Cut Pro 10.4.7 verfügbar…
Final Cut Pro X und Proxys für 8K
Final Cut Pro X importprobleme VHS Kassetten
Final Cut Pro X.3 Event am 18. Nov. in Berlin!
Final Cut Pro X 10.2 Training *auf Deutsch*
Final cut Pro 7 auf Sierra fehlerhaft
Final Cut Pro X Keywords und Verschlagwortung
Twixtor Plugin für Final Cut Pro

















weitere Themen:
Spezialthemen


16:9
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos