Hello! Have Camera Canon Hi8 and would like to my analog films, which I've recorded thus, digitizer. To this end I recently published a VideoCrabber of Medion gekauft.Bei this product was the software "Power Director V6" of CyberLink here. Now I have today tried to cut a film digitizer, with the result that you watch the film afterwards but there was no sound. I connected my camera s.VideoCrabber with S-Video and the yellow cable. What have I done wrong? Can anyone from the great community a few tips genetically synonymous because the settings in the attached Programm.Komme not quite so clear. Did someone perhaps the instructions from the program "Power Dirctor V6" in the form of a PDF? Thank you in advance. Dietmar C.
Antwort von froggy:
Hello, the S-Video cable transmits no sound. The yellow "RCA" is not synonymous. The transmit both the video only, with the S-Video cables are better quality and you are being made only one of the two cables need.
If you want to record the sound and the Videograbber no audio inputs (red / white), then you have the make of your sound card. Your camera probably has sons red and white RCA output. The cable must then be on the other nem to be 3.5 mm jack and then you can put in the line-in input of your soundcard go (usually blue).
Then in Windows input to "Line In" and ensure the recording is likely to stand in the way nix. If it is not immediately hinhaut. Bottom right double-click the speaker icon and then click anywhere to "Properties" and "Studio" look. As is usually the Micro and must be set to Line-In asked.
Many greetings Markus
Antwort von vaio:
Hello Dietmar C! Probably you next to S-Video or RCA synonymous - video (yellow) s.Grabber connected. Did this have a white and a red line (left and right stereo channel), you need the audio cable of your player according makierten also s.die jack. Has the no audio connections, you need an adapter cable of RCA (red and white Male) to Stereo Jack (to match your sound card - mainly 2.5). Of course you need the yellow RCA cable and remove software in your control, even if the (S-) video signal is looped through. It may well be that you have previously CVBS (yellow cinch)'ve recorded. If you have problems then with the synchronicity of Picture and Sound, then please just look at the "Video Digitizer. What software thread" after. Speaking of software: For PowerDirector can I give you no information. I do not know.
Antwort von B.DeKid:
http://www.google.ca/search?hl=de&q=cyberlink + Power + director & btnG = Google Search
Since there are videos on how the progi works. Furthermore, this program but even purifies.
And in terms of the grabber - there should be a leaflet with connection options, plus it was his explanation. Where it can be seen as shown where cable which comes off.
MfG B. DeKid
PS. Capturing in MPEG2 then with Nero as a DVD burn.
Antwort von Dietmar C.:
Hello, Thank you for your answers. Be it the next few days to test and you report them. Gruß Dietmar