Frage von jochen79:
Hi all, just have an urgent problem:
I close a camera s.einen SonyDSR-45P DVCam Recorder s.and Capture directly live and without tape via FireWire, in Premiere. On Windows, this works without problems, however s.Mac (synonymous CS3) does not: (
I can import from tape.
Synonymous with Windows, I can see the live image in the preview window, not the Mac.
Hat wer ne Idee s.was could be the problem? Need the function again very strongly.
Thanks and greetings schonmal
Jochen
Antwort von srone:
times tried connect the cam directly s.den mac?
lg
SRON
Antwort von jochen79:
Well, that brings nothing, because it is a studio system that runs over nen mixer and then goes through the YUV DSR45. And the customer wants to be just right after the recording to go home with his hard drive by putting it in their arm around the intranet. Therefore, the possibility is synonymous with cutting work, recording or not.
Antwort von srone:
ok, the info was missing in your first post, would try the case in time to put a tape recorder dv to start the recording to capture and simultaneously s.mac, maybe you can help it, almost to the principle of analog tape machines hinterbandkontrolle .
lg
SRON
Antwort von jochen79:
Hi, have tried out the degree, but the simultaneous capture during the recordings does not synonymous. Neither Premiere still in FinalCut.
Antwort von srone:
because I assume that you have all the menu settings of dv-checked-recorders, if not, make up, and the recorder is in principle recognized by the mac as you were writing above it, I think, unfortunately, synonymous nix a more, but perhaps even know of a the mac specialists here more, I hope your problem resolves itself.
lg
SRON
Antwort von jochen79:
as soon as I press the button to the rec-recorder, so the start timecode, the timecode synonymous recognized finalcut. So right corner.
Antwort von srone:
If you then press the k on record what happens?
lg
SRON
Antwort von jochen79:
If I then go directly to the k (ie, direct recording), then he says "can not find device" (or something similar)
Antwort von srone:
again as a summary:
mini dv capture by s.mac band is in k and premiere,
all (!) menu-synonymous and other settings of dv-recorders are identical with those which you used in windows, where dv-tape-capture work, not the meantime, what have you adjusted and the problem lies there.
lg
SRON
Antwort von jochen79:
again as a summary:
mini dv capture by s.mac band is in k and premiere,
correctly
all (!) menu-synonymous and other settings of dv-recorders are identical with those which you used in windows, where dv-tape-capture work, not the meantime, what have you adjusted and the problem lies there.
If I plug in it here in the office s.den pc, premiere cs3, then everything goes as usual, I put the firewire cable s.den mac, the described problems, I again put back, go. So I close my time as a recorder of errors made.
Antwort von srone:
rückfrage: in your office, it is identical yuv connected via the endemic? I ask the purpose of vemuteten spatial separation.
lg
SRON
