Frage von Ben3001:
Hello together,
I have the s.anderer office here in the forum already discussed problem that Vegas when rendering with the AVC codec in conjunction with a quad core CPU immediately crashes. Even when it seems to me to use only one core computing to solve the problem.
In order not 40 hours on my video, I have to wait until an update by Sony still pending, initially tried the MainConcept MPEG2 codec to use (template Blu Ray 1920x1080, 50i, 25Mbps). Now starts the rendering process is, however, depends to Vegas every time after about 12%.
My source material comes of a SonySR11e and in my system werkelt a Q6600, 4GB Ram on Vista 32bit.
I would be pleased if you could help me.
Thank you and love greetings
Benjamin
Antwort von Marco:
Not enough space on the target partition?
Defective RAM module?
Overheated CPU (cooler Liability / dust)?
Marco
Antwort von wolfgang:
When AVC encoders are the problems with Vista and Quad German unfortunately only too well known - at the Main Concept mpeg2 encoder, however, these problems are rather unusual.
Hardware may be a page - the other question would be whether to hang s.der always exactly the same body, whether the thing thus theoretically synonymous to a single defect may be attributable clip.
Antwort von Ben3001:
Thank you for your help. The note with the defective clip has me on the right track. At the point s.der Vegas regularly hang, was that, as with Reechaad in a post next below (http://forum.slashcam.de/vegas-pro-8-absturz-bzw-aufhanger-beim-rendern-vt65944.html) a "fast track" clip.
Even for me it seems to help if I change the number of threads in the Options sat down. I just try it with 2 and the first critical point is already happening. With 3 threads Vegas also produces a crash.
Nevertheless, I understand the whole thing does not really. Finally, the external MPEG2 codec but purchased and not of Sonyand have so really the problems of the quad has Sonywith be unaffected.
Best Regards
Benjamin
Antwort von wolfgang:
You know, without an exact understanding of the source code - and that has no one here - your question is not answered. We simply know too little about how to calculate and transfer s.den external purchased MainConcept MPEG2 encoder happens.
We must be rich, if you've found a way, the thing at the moment for you to solve.
Antwort von Ben3001:
Yes, synonymous'm very happy that it is now, when tightened synonymous with hand brake, running.
Thanks again for your help! I was really already s.verzweifeln!
Greeting
Benjamin
Antwort von darg:
Yes, synonymous'm very happy that it is now, when tightened synonymous with hand brake, running.
Thanks again for your help! I was really already s.verzweifeln!
Greeting
Benjamin I would question the clip individually render times and see if it happens then synonymous. Since it is an accelerated clip is twofold rendering would not really change what otherwise quality. If the clip without his neighbors in a single timeline is reasonable, it can render times again a Vegas problem. I have all the synonymous nase long that Vegas Pro with me some clips as a defect committed when they are alone at times but a timeline establishes only a little or move on once they are OK. Understand that one ....
Antwort von Ben3001:
Thanks for the hint Darge. I will try the same.
Ason, I probably happy too early. The rendering with the MainConcept MPEG-2 codec is now in trouble through. In the compilation of the images was 71% after the crash with the following error message:
An error occurred preparing the image
Filename: STREAM/0001.m2ts
Status: TSWrapper.dll:: CTSWrapper:: ProcThreadMain:: Failed to read file ES. - The ES file may be shorter than the size described in the MUI file.
I then tried the project on my laptop (Core 2 Duo, 2 GB Ram, also Vista) to render. Again, with little success: Identical error s.gleicher body.
It is really verweifeln.
I wish you all if ever contemplative Festtage.
Greeting
Benjamin
Antwort von wolfgang:
Do you direct the output to Blu Ray? And then you use wave64? Try times with 5.1 sound (if the DVDA is installed, the Pro AC3 encoder available).
Alternatively, sound and video separate issue, and in the DVDA5 can create Blu Ray (eh would be the better option).
Antwort von Ben3001:
Thanks for the hint Wolfgang. You're right, I've always tried directly a Blu Ray image to create. Unfortunately I only have Vegas Movie Studio and not the professional version, ie not only DVDA 5 Special Architect Studio 4.5 without AC3 Pro. I will still times Picture and Sound render separately, maybe it works well ...
Antwort von wolfgang:
Perhaps the crux: then choose a different sound, and not wave64.
Antwort von Ben3001:
I now have the sound as ac3, template and DVD 5.1 gerendered ever the DVDA 5 Demo loaded. Can I use this with the sound then, provided the video is now no more problems, with DVDA burn a BluRay that I on a normal player (in my case PS3) can play?
Liebe Grüße
Benjamin
Antwort von wolfgang:
Yes, can du
Antwort von Brenner:
Hello,
Quad is a problem still?
Is there an official notification of Sonyand if so, where?
I stand before the decision my X2 5000 + to a faster X2 or X4 version einzutauschen or renew.
Antwort von Marco:
No change.
With a new purchase should you have a dual core does not exclude, especially since the benefits of a quad is questionable. A dual core with faster clock can be possible under the circumstances synonymous with regard to the performance the better alternative. I personally would rather the X2-rail track.
Marco
Antwort von wolfgang:
We do not know when Sonydieses problem is - even when it seems only with German versions of Vista on some Quad occurs, and apparently not on English versions of Vista.
But I hope the matter is already resolved - and then watch with a stop Duocore rather old, compared with a quad with the same clocking. I would stop synonymous always remember.
Antwort von RickyMartini:
VMS9 semmelt me happy when rendering times from synonymous. I use a Q6600 @ 3GHz. Otherwise, the performance with the quad is very good.
For Edius NEO However, there is no problem with a quad. Are synonymous, since all four cores fully utilized, which is a not quite significant time advantage.
I have C2Ds two synonymous with 2,8 Ghz and use a laptop with a P8600 (2x 2.4 GHz), which I also use for video editing.
Antwort von Brenner:
Well, I would have to MediaPC (now synonymous cutting machine) not bought Vista * heul *.
As a stopgap, before buying, I'm grad to be my X2 over clock.
Antwort von RickyMartini:
As for the rendering, I just made a test.
Here are my quad (4x 3GHz) to my book (2x 2.4 GHz) lined up against each other.
The task was a native AVCHD file (my HF100) with a length of 2:08 minutes in an M2TS file with maximum video settings (1920x1080i, 16MBit / s, AC3 2.0) or greater.
Here are the results:
Q6600 @ 3GHz: 09:42 min (3 cores in use)
P8600 @ 2,4 Ghz: 17:15 min (full)
So worth a multi-core CPU more than evident.
Antwort von Marco:
"This is worth a multi-core CPU more than clear." For rendering. What else? The actual work for which you must spend time s.PC?
Marco
Antwort von RickyMartini:
For rendering and general work.
Is the CPU with two or three cores busy, there is still enough air for some other application.
In direct comparison to my above Doppelkernern is a PC with quad just a class for itself, what the performance is concerned.
If you work with virtual machines, the performance advantage is also evident.
However, the RAM usage is very high, each system can be very slow.
Antwort von diemei:
Hello Benjamin
It seems in some programs, a problem with the Quadprocessoren to be.
I have the same problem with Premiere Elents 7, there remains the Scene detection always hang and a reboot is required.
On my laptop, I have not the problem, Scene detection, edge, edition everything works fine, just slowly.
Greeting Diemei
Hello together,
I have the s.anderer office here in the forum already discussed problem that Vegas when rendering with the AVC codec in conjunction with a quad core CPU immediately crashes. Even when it seems to me to use only one core computing to solve the problem.
In order not 40 hours on my video, I have to wait until an update by Sony still pending, initially tried the MainConcept MPEG2 codec to use (template Blu Ray 1920x1080, 50i, 25Mbps). Now starts the rendering process is, however, depends to Vegas every time after about 12%.
My source material comes of a SonySR11e and in my system werkelt a Q6600, 4GB Ram on Vista 32bit.
I would be pleased if you could help me.
Thank you and love greetings
Benjamin
