Frage von WWJD:
Hi people
I have been busy myself lately with the sound a bit more and I gained a good Field Mixer Sound Devices to the 302nd
Camera still serves as the HV30.
I have now taken over the weekend for the first time with both devices over the radio path (G2 Sennheiser EW 100), some interviews.
The mixer level was absolutely fine so between -20 to -12 but s.meiner Camera I had to my surprise runterpegeln strong because otherwise the total Tonquali would be overridden.
'm A little unsure: Do I set s.der Cam in sound level so that both devices have the same audio control is, or is it generally so that the CamMicEingang is a bit sensitive?
Hope you can help me next.
Best regards
Jack
Antwort von rush:
You have to have the one camera on the mixer level disqualify! The values are of course not identical and depend on each of the used camera and it is received from transducers, etc. - especially if you still synonymous adaptierst to jack ... And if the whole still has a spark gap is anyway, depending on attenuation settings ...
Say .. rausgeben Tone s.Mixer and then probably disqualify the Camera-20db ... which should fit properly and then nothing more synonymous override if you s.Mixer correct pressure level.
Antwort von WWJD:
Thank you rush
So, if I understood you correctly, then all should be so ne Art calibration of equipment, right?
Antwort von rush:
True ... If the output level of the mixer once to the Camera "measured" was nothing more you change so tonmäßig s.der Camera itself - That you do everything with the mixer.
Antwort von WWJD:
Aahhh
That sounds good.
But what would you take as a starting point for calibration ne?
An interview with a few meters distance between mic and person, or what?
Antwort von mon3:
of the 302 are still in a Tone of 0 dB.
help you with the level of your camera manual out. I know the camera or its not sound department, so I do not know if it indicates the sound level in dB or beams, but with about -10 dB s.der camera you're doing well.
s.mixer and you can up to 0 dB pressure levels, have not mentioned your rumkraxeln area, which makes no sense.
And can the camera for a synonymous Line-level process at all? if not then give s.3ß2 a microphone level from which the adaptation s.die camera easier.
