Frage von oh_no:
Hello,
did get the raw material which, unfortunately, in NTSC, the film is, however, later in his PAL. what should I do:
1. Raw material before the cut in PAL and all PAL intersect with Premiere
2. With the premiere and cutting the finished film to PAL conversion (conversion of synonymous and text effects
or do you have other ideas?
Thanks in advance
Antwort von Markus:
or do you have other ideas? What speaks against it, the film in NTSC to leave? Many PAL devices come in so clear ...
Antwort von oh_no:
but not all, and especially old appliances have their problems with it.
Antwort von Axel:
but not all, and especially old appliances have their problems with it. Subject only Elektroschrott-Messies. Television with an oval screen and overscan that the DVD logo instead s.der edge anzutitschen, disappears altogether, appliances from the 80s with an antenna input on which you do not play in any DVD have wanted.
There are other DVD player, even with some pressed DVDs do not come clear, and even brand appliances.
More importantly, however, that a conversion of NTSC to Pal Pal worse than 60th Even if it is behind on
most devices running Pal.
Antwort von TheBubble:
did get the raw material which, unfortunately, in NTSC, the film is, however, later in his PAL. what should I do:
The source material with a good pre-converter according to PAL and then convert further. How do you ensure that other components added (titles, overlays, other additional PAL clips) is not subsequently be extrapolated.
However, if all the materials available in NTSC and you are not 100% sure never had a NTSC version of the film to create, then cut in NTSC and convert (again with the best possible converter) at the end. Title, etc., are then extrapolated while, but that is IMO less bad than 2x to convert.
(In principle, one could of course synonymous the starting material after PAL and then convert the movie 2x exactly the same cut (with the recordings after PAL convert NTSC and the original recordings) and other supplementary material (title, ...) for each target format suitable paste. Whether the effort worthwhile, everyone must decide.)
Antwort von Eva Maier:
For me, the software konvertieten of NTSC to PAL only scrap delivered, so I had to change hardware.
/ E
Antwort von TheBubble:
Whether a software or hardware solution is used is no preference. Only good enough, it must be.
Antwort von dihofi:
do you have any tips as what affects conversion software?
Antwort von beiti:
do you have any tips as what affects conversion software? My standard tip: Canopus ProCoder Express (approx. 60 euros).
