Logo Logo
/// 
Aus XH A1 mach Schulterkamera

For XH A1 do shoulder camera



Frage von aight8:
Februar 2011

Thanks to my Wide Angle Can my XH A1 I tatsätächlich on the shoulder. Us because it then had a certain weight, it is still rather quiet. Because when I lifted the whole evening in his hand, shaking changes are really not a rarity. On the shoulder, at least I can not really shake.

Ok and i can not see the display. No matter.

Now there is really no way to make Tragart comfortable on a cushion?



Antwort von Daniel007:

I would be interested to know how you see then what you just aufnimmst?



Antwort von aight8:

Either I unfold on the screen then I though the display of very close look. But the wide Angleist so strong that I have everything in the picture anyway. Naia, lame excuse;)

Another point is dependent synonymous, that when I turned so documentaries, so synonymous me to concentrate on the action. If I focus on the viewfinder, the plot is somehow not to watch: S No idea. Vill calibration of practice. Or how it is with you?








Antwort von nicecam:

Shoulder camera for the poor?

This has not earned the XH-A1!

"If I focus on the viewfinder, the plot is somehow no longer in focus." In the technical sense, of course, just yet. And figuratively synonymous. Is the right choice of detail but with decisive for the success of the film - for what should be in focus.

Dear aight - not like that!

There are more viable solutions, Henkel men make some shoulder camera friendly. Use the search function. Entering "XHA1 shoulder camera" gives us 16 documents; recommendations but there should come out of one kind or another in?

-------------------------------------------------- -----------------------------------

What does the smiley face actually: S

Hierthe definition: "What you say makes no sense"

So - I'm saying :-)




Antwort von B.DeKid:

Procure for you NEN flat blade plate

relatively long so 40 - 60 cm

NEN drilling hole purely for 2 - 3 Spacerscheibchen ne and quick-change plate

NEN piece of wood you get bissel neoprene and velcro or short screws and adhesive foam plus

Cutting you out of foam (a few layers) for ne shoulder pad (cushion) sewing all with the neoprene

With the Velcro secure the rear screws which you s.dem Holzplaettchen s.ddie angle plate


I think you understand how I my without me now you ne sketch or paint?

MfG
B. DeKid



Antwort von nicecam:

Yippee - the DIY solution!

So is the extent to which the self-assembly instructions that give you or others here, synonymous realized, or if you prefer to be set to Ready.

I think I'm catching up to synonymous - both in terms of willingness, to accept solutions DIY, as synonymous to the self's to proceed. Insight .... :-)



Antwort von aight8:

Yes, the idea of DIY solution came to me already synonymous in meaning but a finished product would be better.

I've tried recently many of these shoulder stands. Even with support stomach and chest. That's me, but too much, and limits me to participate too much.

I really need only as a shoulder pad with extension.

About the term "shoulder XHA1 camera" 16 posts will be nowhere but what I want.

-----------
Yes, the S refers to the fact that I am confused because I'm looking for something which it SO does not even exist. or do not know yet.



Antwort von B.DeKid:

"Aight8" wrote:
....

I really need only as a shoulder pad with extension.

.....


That's what I've just described but synonymous?

So can ne seamstress but will probably be sewing pillows or the NEN?

NEN from two metal rails aka angle plates pushed together-in system to tinker should still get out but synonymous

And ne Removable must be worn on NEN small spacer block so synonymous not just the art or?

But hey, clearly if you want to buy something ready if you please do this no problem.

My idea was not within 2 hours of tinkering, depending on how fit you are with nerve sewing machine.

MfG
B. DeKid

PS The shoulder pad can partially synonymous polymer clay craft could so directly or XLR connections for integrated install and Battery. :-)



Antwort von B.DeKid:

Here times have ne quick sketch

So can lock two Mettalplatten each nerve with the central guide groove nervous man with wing nut

NEN front spacer with removable drive, rear lower ne shoulder padding

So you can push the thing to save space or just have to extend all the synonymous distance to the display.


Simple but effective and a reality for really small money.

MfG
B. DeKid




Antworten zu ähnlichen Fragen:
(Remote camera control, external) for the Canon XH-A1
Seeking rain n / camera protection f XH-A1
Second camera on the XH-A1
What additional camera XHA1?
Canon XH-A1 with Manfrotto rear camera operator
Shoulder rig mit 2 Shoulder Pads sinnvoll?
Shoulder/Brust Rig
Shoulder Mount Baseplate Frage
DIY Shoulder Rig Sony AX 100
lateral stripe on 4:3 programs in Plasma Television
Kann mich nicht entscheiden zwischen field monotor oder shoulder rig
Vocas stellt Sony Venice Zubehör u.a. für USBP MKII Universal Shoulder Baseplate vor
LIFErecorder 8K camera
The Wrong Camera
BOSMA 8K Cinema Camera
The 3D Camera that Hollywood Loved
DV Camera als Wandler
3D PRINTED A CAMERA LENS
BM Camera Gehäuse Modding
Z Camera E1-mini Erfahrung ?
Anschluss Camera ->VTR
Blackmagic Camera Icons
"Camera" für Chromakey
DIY: Camera Lens
Blackmagic Camera Update
Blackmagic Camera updates 4.5

















weitere Themen:
Spezialthemen


16:9
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Avid Media Composer
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos