Infoseite // No picture at ext. monitor via firewire-> DV camera-> AV out



Frage von Serge:


Hello,
I place myself once briefly:
I have Serge, performance / photo / installation / video artists from Holland and a small problem with monitoring. My small part in DV, a JVC DVL157E, I want to use the converter as Firewire / AV for my editing (Final Cut Pro on Mac) to check for color unc on an external monitor. The bilt comes into the camera (shown on the LCD) but it's not next to the monitor via AV.

All logical and illogical matters synonymous one pahr I've already tried, but no success.

Has anyone here perhaps a pahr tips?

(forgiveness for any schreibfehler)

Space


Antwort von MiXMaster:

Hi,
possibly the direction of the signal conversion is wrong. With you it would have to default, namely, 'A / V -> "DVout = OFF'
for the conversion of DV to AV.
Perhaps hilfts.
Gruss
ph

Space


Antwort von Serge:

There is an unfortunately nothing to put on the 157E. Can it perhaps be that of the 157E simply has no direct converter for firewire / AV (although I've never seen that eingentlich with one DVcamera with DV-in ...)?

Space


Antwort von Stefan:

I can see the user guide does not fall.

JVC, manual, GR-DVL557, GR-DVL555, GR-DVL450, GR-DVL357, GR-DVL355, GR-DVL157, GR-DVL150
http://www.jvc.de/html/faq/camcorder/GR- DV / 1155 / (PDF, about 3.3 MB)

The camera is connected correctly s.den monitor? If you play a piece with the same cabling from a tape that appears on the monitor?

Good luck
The fat Stefan

Space


Antwort von MiXMaster:

"Is the camera correctly s.den monitor connected? If you play a piece with the same cabling from a tape that appears on the monitor?"

So I do's rendering in the meantime -> small little piece to play on tape and then play it again auf'm monitor (far from ideaal). Of all the computer runs fine and the camera of camera to monitor synonymous ... Very funny.

I got the original manual and not able to entdekken to what can be the cause.

It can not be that some setting in Final Cut Pro for this verantwordlich ... or?

Space


Antwort von Stefan:

Final Cut Pro will be responsible, I can not imagine. The DV is indeed s.der camera properly (LCD display works and recording works).

To turn off the Final Cut Pro, maybe you can try to influence safe place to another Final Cut Pro DV source s.The JVC hang. Another DV camera or any other calculator, if available.

Hmm ... The analog output is not synonymous defective or incorrectly connected works (tape edition).

Have you mentioned the JVC support?

Good luck
The fat Stefan

Space


Antwort von Serge:

"Stefan" wrote: Final Cut Pro will be responsible, I can not imagine. The DV is indeed s.der camera properly (LCD display works and recording works).

Exactly, I think to myself synonymous.

"Stefan" wrote: To turn off the Final Cut Pro, maybe you can try to influence safe place to another Final Cut Pro DV source s.The JVC hang. Another DV camera or any other calculator, if available.

Did I already tried synonymous with my Powerbook nix .......

"Stefan" wrote: Hmm ... The analog output is not synonymous defective or incorrectly connected works (tape edition).

Right.

"Stefan" wrote: Have you mentioned the JVC support?

That would be perhaps a worthy experiment. But actually I see at the beginning suggests the camera is not quite ok.

"Stefan" wrote: Good luck
The fat Stefan


Thanks for your tips!

Space


Antwort von Peter S.:

Some JVC models with DV-in is no direct conversion be possible only to record on tape.
MFG Peter

Space


Antwort von Serge:

I ask for views on whether or not that synonymous to the JVC 157E concerns.

Space



Space


Antwort von Serge:

JVC is saying

Space


Antwort von Serge:

Again ...

JVC says that only some JVC models have a direct conversion. The 157E certainly did not! : (

We'll see what a time for XM2 costs ....

Space


Antwort von Stefan:

Condolence!

If JVC has since answered correctly, the superübel. Why buy a camera with DV-IN?

1 / To DV equipment of other DV source (camera, calculator tape) to DV save.

2 / For a preview of the DV editing on an external monitor to have.

If JVC does not offer a second benefit, there needs synonymous None wondering if someone moves to another Manufacturer with more meaning and understanding.

And what else - a restriction of "no AV-out at DV - Set up" is not in the manual and probably not synonymous with the former product. Is not that enough for a complaint because of hidden defect?

But it may be synonymous, that there was only one overworked JVC hotline, which has the problem together with AV-IN / IR IN-bearing of information. It is true that some models have AV-IN. AV-OUT for DV-IN service is a fundamental and important function, as dumb can be no development department, right?

Good luck
The fat Stefan

Space



Antworten zu ähnlichen Fragen //


Can destroy Firewire cameras?
RöhrenTV via Firewire Camera s.Final Cut Pro connected Tonversatz problem
Delay of Camera - PC via Firewire
MiniDV camera with firewire upgradeable?
Camera / Firewire signal as a full show
Cable 1394 with a normal firewire cable replacement - Panasonic Camera NV-DS33
JVC - GR-D239E - firewire problem, camera is not recognized
SonyDCR-PC1e - Camera connection problem to the PC via Firewire IEEE 1394
No picture at ext. monitor via firewire-> DV camera-> AV out
DV camera is not recognized via firewire
HELP! XP does not recognize camera via firewire
S.Firewire Camera Connector




slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash