Frage von Shalveon:
Hi folks,
I have again.
At other Canon XH A1 Owner:
Is it normal that the built-in microphone sits relatively loose?
I can easily move out and her. Between the micro-head and the housing is synonymous a rubber ring.
Have the feeling that part is always relaxed.
Can you remove it, or somehow re-tighten?
The manual was nothing about this?
On the Micro itself, I have not pulled the cam, or even worn out.
Warranty? Not that it means I would have improperly handled the camera.
Any hints would be great. Camera is just few days old.
Again thanks in advance.
Shalveon
Antwort von BananaDragon:
Use some of our search function. On the subject, there were already quite a few threads.
Partly, it was probably that it is normal (decoupling). Other service staff felt it should fit snugly.
As I said, the search is guaranteed to help you.
Greeting
Marco
Antwort von vicky:
Had the same problem with the XM's Mirkro can be synonymous, but not so easy.
When I did the stupid thing I sometime just glued to with superglue, and it holds without any problems.
Antwort von Shalveon:
I do not take it amiss.
I have already searched the forum.
Undzwar after loose or loose Microphone Microphone.
Here I was not really a suitable topic.
It is interesting to actually know if I should replace the part, as does the already shaky. For the decoupling should be but the rubber ring and are not part of the relatively shaky draufsitzt.
And before I have something solid stick - not with a new unit, which still has warranty ;-)
Do you have any links to the topic?
Best Regards
Shalveon
Antwort von Markus (unangemeldet):
Simply the subjects in the category
Canon XH A1/G1/XL-H1Microphone very shaky ... ;-)
_________________
Sincerely,
Markus
Antwort von Shalveon:
I've found. Dankeschööön.
Let's support what the Cannon will tell me.
Thx
Antwort von mars.venus:
Hello Shalveon,
I own the XH A1 has been exactly 1 week, she was picked up in the original packaging. My transport was synonymous flawlessly. Except for the mounting of the lens hood and a few small short recordings (15 min), I have the large part not touched. I have only once intensely involved with the manual and on the network by the sub-researched. Here I am to rise to your notice, what I like in my camera had reviewed - and lo and behold, the Microphone is pretty loose. So, in my view, can do, such as the shaking is not normal. As I said, it is very me through my current slow and cautious movements have not yet noticed. I would be happy times interested in what you support the Canon has.
Greeting
mars.venus
Antwort von upro:
On my Canon, the support at my request, which reduces jitter. Believe there came yet NEN small rubber desire to do so. Moreover gabs ne new firmware: D
Antwort von lugburz:
rubber ring ... was with the thoughts already far away
Antwort von ruessel:
Moreover gabs ne new firmware what version number?
Antwort von lugburz:
where can I see?
The technician said that he ne current firmware up, should I be an elderly. Was probably so my settings were, after returning the camera away.
Antwort von ruessel:
Deutsches Manual 140th Page
1. Camera to card menu to switch (right side camcorders, small slide switch)
2. On "VCR / Play" on
3. In the "System Setup" in the firmware version read, for me there is gray background: FIRMWARE 1.0.0.0
In the summer there was the version 1.1, Canon wanted but not on my XH A1 restore (lt. rumors there was something s.Autofokus optimized)
Antwort von lugburz:
I check the times when I'm at home. (tonight)
Antwort von lugburz:
Firmware version 1.0.1.0
Antwort von Gast 0815:
Here, too: 1.0.1.0, the XH-A1, I have been about 3 weeks.
Greetings from Marburg
Antwort von ruessel:
Thanks for the info ..... then it is not my XH A1 to service.
Antwort von HighDefinition:
@ Russell
there is the firmware version ne changelog can be found somewhere?
times I had wanted, but I am not found anything.
Antwort von ruessel:
No..
but what is it, there are apparently only 2 different versions.
Antwort von Gast 0815:
". Fixed the Lanc remote control malfunction.
. Fixed the malfunction in which some functions do not work with non - Canon Lanc remote controls. "
Source: http://dvinfo.net/conf/showthread.php?t=103258
Greetings from Marburg
