I have a JVC mini DV camcorder GR-DVL 100, which is associated with the data communication cable RS-232C via a COM interface. PC recognized the camcorder does not. About C: \ Windows \ INF folder, there are only drivers for Kodak and Philips, that is) on New Hardware Wizard (Control Panel, I have no success. Who can help me to install the camcorder?
Thank you in advance!
Chow, balu.
Antwort von Jan:
Hi Balu,
your camera's already a little older, what do you want to do? Film Fotos'zum to PC or PC?
For Stillimage's you were on the right track (has no USB?) even if older model of JVC with 800,000 pixels and without Speichkarte record photo's with 640x480. Not a good picture, than to send e-mail.
For videos, you need firewire / DV / I-Link For new PC's or laptop's is a plug-in card, installed in older one needs ne card (OHCI compliant would be good for the automatic recognition of Window's) a DV Camera Cable 4 pole - Other Page 4 or 6 pin (4 pole often laptop or DVD recorder), (6 pin often computer (tower)) and Of course editing software. But there is already synonymous with Set's all three for ¬ 30, although the quality of the cables or software not too much should be expected.
January
Antwort von GhostDog:
Hello Jan,
Thank you for your answer. I want to transfer video to PC. My camcorder is old indeed. I now had the idea. JVC proposes accessories as a kit HS-V 16 (very expensive, a bit old) with cable (PC connection cables and edit) before. However, I have only bought the cable. Firewire works synonymous with Windows 98 SE? an old PC AMD 1 GB? It is a plug-in card Firewire (DV / I-link. OHCI What does this mean?
Thanks in advance.
Balu.
Antwort von Markus:
Hi Balu,
Answers to most of your questions you find here: FireWire FAQ">Camcorder / recorder s.PC connect and capture images
The RS232 interface is no video recordings can be transferred to the calculator, since the route is far too slow. Normally RS232 comes with the device control is used, ie with the right software, you could remotely control your camcorder from your PC.
Antwort von Jan:
Hello,
Mark is a little stressed, though I can not blame him, this question comes every week 3 times before.
When OHCI standard Windows immediately recognizes your camera without any drivers. It really has no use it to buy of JVC. Cable does not cost much at your Cam is a 4 pin PC Warsch. Quickly 6 pole again s.PC whether he looks exactly like your cam. If you have little money if you have time look at the Windows Movie Maker on it (I think the only gibts s.xp?) Or a download program for DV editing eg with Scenalyzer.com. With one purchase with little money, I would you recommend that the current software of Magix (ca 50 ¬) Normal Version But you should only look to the views of your hard drive, because the dubbing of 60 min to the PC times already claimed about 13 GB. And if possible, use a blank hard drive.
And of course bring a lot of time, one or the other here in the forum likes to sit s.PC times a night, so with time as 2 h there is nothing done.
