Frage von frank.wagner:
Hello,
I have both XP synonymous as a MacBook pro. So slowly, I would completely synonymous with the DV editing on the Mac switch
Adobe Premiere Pro CS3 under 10.5.3 is installed. There is a Panasonic NV-GS300 Videor camera. Yesterday I filmed a few sequences
With the XP laptop no problem with the import of the film on UBS
Between the Mac, I wanted to have a firewire cable s.der DV port of the GS300 import the data accordingly. The GS300 was the PC connection mode. Unfortunately I had to find that Premiere (Mac) Unfortunately, the GS300 is not recognized.
In Premiere Pro, I have under Settings / Control Devices / Options PAL and Panasonic set. The GS300 can not choose. I have simply chosen thus standard
What am I doing wrong?
Antwort von Axel:
I know your camera, and Premiere, I know only of the old 6.5er version. Could it possibly be that those "PC Connection" mode a pure USB story? Both under the old first mentioned as synonymous with iMovie or FinalCut does the firewire connection only on the VCR / VTR - mode ( "Play") with all cameras that I know (even just 10).
Premiere shutting down camera off. Camera again, in the Play mode, then start Premiere. Try only das
Antwort von frank.wagner:
Hello,
Now if I understand correctly, I am on the "Play Mode" = "Band Play mode" it still does not - unfortunately
Does the MacBook Pro laptop maybe a Panasonic GS300 drivers? So times until the 10.5.3. Mac OS on the video-camera detects
Antwort von Bernd E.:
... Does the MacBook pro ... a Panasonic GS300 drivers? ... No, do not generally need Firewire Drivers. This site:
Antwort von Axel:
Does the MacBook Pro laptop maybe a Panasonic GS300 drivers? So times until the 10.5.3. Mac OS on the video-camera detects You do not need to be bold to write, and you need no drivers for firewire. It seems you are Premiere Beginners. What the manual says?
Look beyond
these
Antwort von frank.wagner:
Premiere Beginners yes
Then I'll start with simple logic:
MacBook pro Mac with 10.5.3 installed
Adobe Premiere Pro CS3 (version 3.2.0 (374)) installed
Panasonic NV-GS300 Video Camera (running under Windows)
Firewire Connection
Because the entire yes now do not have any special components are, I can be a problem s.dieser body and must exclude the errors in my own search.
Is it advisable, therefore Premiere again to re-install?
Antwort von Markus:
Panasonic NV-GS300 Video Camera (running under Windows) Even with the firewire cable? - That which you could find out whether it might s.Kabel or the IR port on the camcorder is.
Antwort von frank.wagner:
Ok,
I think the 5 euro for a new cable in advance should I invest
PS: Actually, this combination should not be unusual - Has anyone here in the forum the same combination in use?
Antwort von der henne:
Hello. I've synonymous and synonymous NEN Mac Premiere CS3. I would recommend you sometime, you try your movies with iMovie is available. Use s.besten the old iMovie 06 (can be done here
Antwort von PowerMac:
I can not understand. I have a GS-400 already had with me on it and it worked well. Mach mal iChat (or Quicktime Player) or the System Profiler and check whether the camera is there and recognized.
