Logo Logo
/// 
Rendern beim Pinnacle Studio 12

Rendering the Pinnacle Studio 12 will take "- may be what terminates



Frage von roloslash:
Juli 2009

Hello, after I have cut many years satisfied with Canopus Lets Edit, I need me now (a new editing program grow, the synonymous and running on Vista read AVCHD files - both can not Lets Edit and is not synonymous developed a pity).

A friend has from the Video Club, Pinnacle Studio 12 and we have gained together cut a couple of films. It occurred to me that when you create the rendering of the film "forever", ie a 15 minutes clip takes almost 1 hours rendered illustrations as MPEG2, AVI as output before rendering to DV tape than 30 minutes (; straightforward film with little transitions and two or three titles, with additional audio) dub.
(; The CanopusLets Edit renders in AVI / tape output in real time, so no waiting in MPEG2 it takes approximately 30 minutes, however, synonymous for a 15-minute clip).

Question:
1.) are of normal for me osRenderzeiten Pinnacle Studio?
2.) Can we set something somewhere (; eg background rendering, or similar order after he cut in front and output to tape or DVD does not render in front of everything again?
3.) which must be observed elsewhere in Pinnacle Stundio?

Thanks for tips

roloslash



Antwort von Bruno Peter:

You use this heavily bruised AVCHD format of the memory card, then it's just takes a long time. Have extra horsepower (; GHz) Treat the calculator if it is to go faster. With Lets Edit You can not compare with AVCHD but because it totally failed!

But you can use the compl. AVCHD footage into the timeline of Load Studio and transcode it into the cut-friendly 35Mbps with MPEG2 and then load this file into a new project. Now you can run over it, the scene detection and edited beautifully.

A loss of quality you'll hardly notice when this workflow.



Antwort von roloslash:

"Bruno Peter" wrote:
You use this heavily bruised AVCHD format of the memory card, then it's just takes a long time. Have extra horsepower (; GHz) Treat the calculator if it is to go faster. With Lets Edit You can not compare with AVCHD but because it totally failed!



No, yet I am still using no AVCHD, but DV AVI and MPEG2, relat there are the rendering times when Canopus program. short. I was only surprised that when Pinnacle took so long, and my question was in the direction as if you can set something to it quicker.

Thanks

roloslash





Antwort von makiHD:

Hi roloslash,

1.) No, the times are definitely not mormal.

My old AMD Athlon 64 3700 + @ 2,2 Ghz (; single core) managed DV to MPG2 with complex transitions and even filters in almost exactly half real time.

Since it with you again but twice as long to run, it would mean roughly that you about an AMD Athlon XP 2000 + or a comparable Intel did.

Then your calculator would be really old ;-)

2.) of Dia, you can enable background rendering, and like this:

Menu -> Setup -> Video tab - and audio settings - Hook and share activate "background rendering.

Then, of course, choose the appropriate codec. I do not Wür select Automatic, Pinnacle because if the "wrong selects" codec, and thou wilt encden into another format that makes the advantage would detract ..

So take DV if you want to re ausgegegen on tape.
Analog MPG2, if you want to save on things, Recher.

However, if the clips are on a DVD-Video, I would always spend everything as DV AVI, and can only render the authoring program MPG2.
In this way, improve the quality synonymous.

3.) Actually, not so much, I would wait, as I said, basically everything as DV-AVI output, defragment the partition a good boy and do ANYTHING wärend rendering s.Calculator, possibly even turn on presentation mode.



Antwort von roloslash:

Hello, Pinnacle now has 11 (for testing, Pinnacle 12 was me) constantly before the test, but this brought my calculator to crash. Since I initially did not even movies in AVCHD, Pinnacle reaches 11, that is synonymous stable. Must get used to but still different layout compared s.das Canopus, but this will do.

roloslash



Antwort von makiHD:

Hi,


So actually Studio 11 is supposed to be very unstable. With me doing the 12er great ....

Did he bring my tip with the Hintergrundrendern nothing?

Vllt time off virus program during rendering. May be, that thinks it's a virus or something and wants to write the file wärend (, so check render). The same applies to synonymous Spybot, Windows Defender & Co.

gruss makiHD



Antwort von roloslash:

"makiHD" wrote:
Hi,

So actually Studio 11 is supposed to be very unstable. With me doing the 12er great ....
Did he bring my tip with the Hintergrundrendern nothing?
Vllt time off virus program during rendering. May be, that thinks it's a virus or something and wants to write the file wärend (, so check render). The same applies to synonymous Spybot, Windows Defender & Co.
gruss makiHD


No, the 12er version crashes after 15 to 20 minutes rendering. Have they re-installed by. The version 11 is currently running stable, synonymous crashes after 45 min did not render.
Except that it can (version 12 synonymous AVCHD; be able to do), there is no important difference in version 11, right?
Was created with 11 and 12 each have a 5 minutes MPEG-2-clip (: there is still no crashes) and the impression that the quality of version 11 was better (, 11) no jerking, 12, a couple of stuttering. Can it be?

roloslash



Antwort von Bruno Peter:

Your PC is skewed to halt the release S12U here is going well.



Antwort von Videobodo:

Hey
Why do you use EDIUS NEO nich? Since you have the super codec of Canopus, a simple and stable handling, it is synonymous. I myself use 1 as the Neo editing program on the Schlepptopp for almost 2 years - 0-problems. On the Work will run for larger projects Edius Pro, also to the complete satisfaction.
The mpeg files created with Neo are much better than the Ring Of denpreiswerten car programs, so calculated and bein with Edius DVD - create the data be unchanged!
Since Neo is given in version 2 soon, the first gibts very favorable.
Bodo



Antwort von opel:

Hello,

Pinnacle is not the most stable software.
Thou canst take out the background rendering in the extras in Project Preferences.
Check the configuration on your PC time with the requirements of Pinnacle: Pinnacle announces principle, only the minimal requirements under which the software is sometimes behaves like an old Saugdiesel.
I am currently using the third version of Pinnacle (, 10.6), which works just fine.



Antwort von roloslash:

"Videobodo" wrote:
Hey
Why do you use EDIUS NEO nich? Since you have the super codec of Canopus, a simple and stable handling, it is synonymous. I myself use 1 as the Neo editing program on the Schlepptopp for almost 2 years - 0-problems. On the Work will run for larger projects Edius Pro, also to the complete satisfaction.
The mpeg files created with Neo are much better than the Ring Of denpreiswerten car programs, so calculated and bein with Edius DVD - create the data be unchanged!
Since Neo is given in version 2 soon, the first gibts very favorable.
Bodo


In Edios Neo pleases me the menu system is not. In addition, you can edit in any NEO created on other systems files (and I collect videos usauf Multimedia Hard Drive (; 500H Ellion with WD 1 terabyte) in MPEG-2 format, AVCHD sometimes synonymous, from various sources. Pinnacle Studio 11 reads these files without complaint, NEO not - is surely the NEO Canopus Codec sharp and fast, but the use to me in which case nothing). I would never go out of my previous Canopus Lets Edit, was simpler and faster with high quality are available in the price range My computer otherwise, but the program is no longer maintained and does not run on Vista.

roloslash

PS: I now the pinnacle some 11 days later, it runs stable. Had between synonymous Magix de Luxe, but there must be the MPEG codec a separate subscription fee, plus I had no desire. I returned it.




Antworten zu ähnlichen Fragen:
Rendering the Pinnacle Studio 12 will take "- may be what terminates
Pinnacle Studio 8 - Rendering Fehler AVI+MPG
Plattenlatz bei Studio 9-Rendering
Pinnacle *de*installieren? (war Erste Erfahrungen mit Pinnacle Studio 9)
Pinnacle Studio 11.1
Pinnacle Studio 10
Pinnacle Studio 11 Plus
Pinnacle Studio 18 Plus
Pinnacle Studio
Pinnacle Studio 9 AV/DV
Pinnacle Studio 9
Pinnacle studio 11.1 Plus
Pinnacle Studio 9 Plus?
Update: Pinnacle Studio 18.5
Pinnacle Studio 9 Probleme
Pinnacle Studio Plus 9.4.3 stottert
Probleme - Pinnacle Studio 10 Plus
Frage zu Pinnacle Studio 9.0 / SE
Fragen zu Pinnacle Studio 9
Pinnacle Studio 9 ---> SE OEM
Bildstabilisator in Pinnacle Studio 9
Pinnacle Studio 10. Installationsproblem
Pinnacle Studio 8 - Tonspur sperren
Pinnacle Studio 18 Hilfe benötigt
Probleme mit Pinnacle Studio 9
Pinnacle Studio 10; keine Disk

















weitere Themen:
Spezialthemen


16:9
ARD
AVCHD
AVI
Adobe After Effects
Adobe Premiere Pro
After effects
Apple Final Cut Pro
Audio
Avid
Cam
Camcorder
Camera
Canon
Capture
Capturing
Clip
EOS
Editing
Effect
Error
Export
File
Files
Film
Final Cut
Format
Formate
HDR
Import
JVC
Layer
Light
MAGIX video deLuxe
Magix
Microphone
Monitor
Movie
PC
Panasonic
Pinnacle
Pinnacle Studio
Player
Premiere
RAM
RED
Recording
Red
Software
Sony
Sound
Studio
TV
Tape
Video
Videos



update am 17.September 2019 - 18:02
slashCAM
ist ein Projekt der channelunit GmbH
*Datenschutzhinweis*