For our diploma, we had to film the cut square and change since then struggling with various problems / uncertainties and therefore a few urgent questions!
Our material is available on mini DV and rotated s.MC Adrenaline (and believe ixh Xpress Pro with Mojo) in Resolution 25 420 DV via FireWire invited. Now we need to change Xpress DV, because the only available software that can read our Project.
1. Am I correctly informed that our material with this Resolutionunkomprimiert invited, ie no loss of quality?
2. If you leave us this quality if we are all after work again on mini-DV off? How is it, if we then take copies on DigiBeta. Goes through the transformation of many lost? Is it true that when copies of DV to DV quality losses are always?
3. Are there problems with body s.irgendeiner the change of Avid versions?
4. Can we might with our Xpress DVgespeichertes Project synonymous later in an open MC?
5. Xpress DV with the lack of important features (eg, effects, color or something?)
Open 6.Beim our project reports Avid, Xpress that only with 8 streams can work, but with our Project 12 was created. What does this mean and does this mean trouble?
The Xpress DV - Version 4.8 is the
Thank you in advance for the help in advance, we are really desperate! Liebe Grüße, Kerstin
Antwort von Markus:
"Wallaby" wrote:
Our material is available on mini DV and [...] rotated in Resolution 25 420 DV via FireWire invited.
That's okay, because this fits with your MiniDV material. (At least when it comes to IT - and not about the HDV material in PAL and NTSC are not. The cassette alone says nothing about what was stored on it).
"Wallaby" wrote:
1. Am I correctly informed that our material with this Resolutionunkomprimiert invited, ie no loss of quality?
No and yes, in that order. DV is compressed by a factor of 5:1, ie not uncompressed. But exactly what have you, without further compression on the calculator on, so no loss of quality compared to the original.
"Wallaby" wrote:
2. If you leave us this quality if we are all after work again on mini-DV off?
Yes, it is.
"Wallaby" wrote:
Is it true that when copies of DV to DV quality losses are always?
No, copies of DV to DV should be without quality loss. Unless there is something wrong.
As far as things to which I can offer practical experience.
Antwort von Wallaby:
Thank you for your answers!
Did we ever many uncertainties! Stupid, if you hang in the wrong degree course and of the whole technique is just a semi has :-)
Thanks and greetings
Antwort von Elenex:
Then I'll say something to the questions 3 and 5:
There are substantial differences between the versions avid and yes, if the Project was created in MC, it may cause problems if there Effects / Plug-ins were used included, in the smaller versions do not exist (eg, Timewarp, Animatte or Paint Effects, which are only found in MC there).
Fundamental problems when opening, it should not really give (the products among themselves are largely compatible, but then stop missing the Effects synonymous and the handling is a little different (in MC, there's a lot more functions than in Xpress DV or Xpress).
Question 4: should work!
Antwort von Wallaby:
Thanks for your answers! Has largely calmed us ;-) The work is now. Even if I bissel was surprised that, when XpressDV version of the Extend nich mal-function. ;-)
