Frage von canonXL1:
Hi,
I did join me for XLR mics s.meine XL1 bought a adapter MA100, now I got no sound from the micro (Sennheiser MD42) if I connect?
Can it be so that you can only use condenser - Microphones?
THANKS in advance for reply
mfG
Holger
Antwort von B.DeKid:
Camera but have switched to the adapter?
Unfortunately you do not know of the Micro, maybe you can say to one of the cronies sound was.
MfG
B. DeKid
Antwort von canonXL1:
jo, had it connected via the audio and 1 synonymous changed it, but nothing except silence :-(
Antwort von srone:
you are you sure?:
s.dein micro work?
b) your xlr cables work?
c) all ports of the (new?, used [perhaps broken?]) adapters are correctly plugged into the camera?
d) the camera is set to mic-level?
e) the aussteuerungsregler are turned up?
If you checked above, eg connection of mics s.einen mixer, replace the xlr cable etc, really is only one of the broken mic input on the camera or adapter.
lg
SRone
Antwort von canonXL1:
times will a - e verify, although I have done this 10 times, Micro + cable + adapter are blistering new, because it would not be :-(
Antwort von Charlinsky:
Hi, I had the XL 1s, but I think you need for a capacitor Micro, I'm not 100% sure (but 99%) some years ago, so I had filmed, so .....
LG
Charly
Antwort von srone:
why a capacitor micro?
I believe that the phantom power adapter, thus falling from a phantom powered condenser micro, with a battery, although more sensitive than a dynamic, but the same principle of connection, therefore, is a dynamic but silent, but should still work without problems.
lg
SRone
Antwort von canonXL1:
THANK YOU FOR USING YOUR -> PROBLEM SOLVED!
Thus the MA 100 is detected correctly in the menu you must turn it on. What a stupid mistake ...
Antwort von srone:
successive logical search is the best way to solve problems of this type, will now enjoy a lot but when.
lg
SRone
